Push Rod 733817M1, SAE 1045 Forged Steel, Black Oxide Coating — replacement for Massey Ferguson, Oliver, and White tractors. Kept in our Guangzhou warehouse for same-day dispatch on confirmed orders, with a 1-piece minimum to clear urgent breakdowns without waiting on bulk quantities. Send a photo of the worn nameplate and our technical team verifies fitment within hours. Ships via DHL, FedEx, or air freight with arrival timing quoted before you pay.
Single-Piece Dispatch — One push rod ships today from our Guangzhou warehouse without waiting to fill a minimum order.
| Parameter | Value |
|---|---|
| Part Number | 733817M1 |
| Product Type | Push Rod |
| Cross-Reference | 733817M1 (reference only) |
| Machine Fitment | Massey Ferguson 165, 174, 175, 180, 184, 185, 188, 194, 255, 265, 274, 275, 285, 290, 3050, 3060, 3065, 3070, 3080, 3090, 3095, 3115, 3125, 362, 365, 373, 375, 377, 383, 387, 390, 393, 396, 565, 575, 590, 675, 690, 698, 699, 1014, 1130, 1135, 2620, 2640, 2645, 2675, 2680, 2720, 2725, 3625, 3630, 3645, 3650, 3655, 50, 275, 290, 383, 390, 690, 550, 750, 760; Oliver 1850; White 5542, 7300, 7600, 8600, 8800, 2-85, 2-105 |
| Material | SAE 1045 Forged Steel |
| Surface Treatment | Black Oxide Coating |
| Condition | New Aftermarket |
| Warranty | 6-month warranty against manufacturing defects |
| MOQ | 1 piece |
| Standard | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Valve train clicking or tapping noise at idle | Immediate — indicates push rod wear or bending |
| Engine misfire on one or more cylinders | High — machine cannot operate at full capacity |
| Visible bending or scoring on removed push rod | Immediate — risk of rocker arm or cam damage |
| Loss of compression in affected cylinder | High — tractor unusable for fieldwork until replaced |
A confirmed Push Rod 733817M1 in stock ships within hours, not weeks.
When a valve train component fails during harvest or a critical grading deadline, the machine is already costing money every hour it sits idle. Waiting for a supplier to confirm whether a part number is even correct burns days before an order is placed. I have watched workshops hold a tractor on the lift for an entire week just because a single push rod was on backorder somewhere [NEED_CITE: agricultural equipment downtime cost factors during peak season]. The replacement part itself is inexpensive; the lost productivity is not.
Availability means nothing if the part does not fit when it arrives. Our Guangzhou warehouse holds Push Rod 733817M1 in stock for immediate dispatch, but we verify before we ship. Send us a clear photograph of your old push rod, a shot of the machine nameplate, or simply the tractor model. Our technical team cross-checks compatibility against the Massey Ferguson, Oliver, or White model range and confirms the match within hours. This step eliminates the costly cycle of ordering, waiting, receiving the wrong variant, and starting over. A Push Rod 733817M1 fast shipping replacement only helps if it actually fits your engine block.
Dispatch speed is only half the timeline. Once the Push Rod 733817M1 leaves our Guangzhou warehouse, transit duration depends on the shipping method chosen at the quoting stage. Express courier services such as DHL, FedEx, or UPS deliver to most international destinations within a matter of days. Air freight serves larger consolidated orders on a slightly longer schedule. Sea freight remains available for bulk purchases where urgency is lower. We quote the estimated arrival window alongside the shipping options so you can weigh cost against machine downtime [NEED_CITE: international aftermarket parts freight options and transit expectations]. Every push rod ships in protective packaging suitable for courier handling, and tracking details follow dispatch so you can plan the repair team's schedule around the delivery.
SAE 1045 forged steel provides the core material for this push rod, chosen for its balance of tensile strength and resistance to bending under repeated valve actuation cycles. The black oxide surface treatment offers a degree of corrosion protection during storage and helps the component resist surface degradation from oil exposure inside the engine block. The push rod must maintain straightness under high-cycle loading — any deviation transfers irregular motion to the rocker arm and disrupts valve timing. Proper fitment depends on length and diameter holding within tight production tolerances. When these dimensions drift, the result is noisy valve operation, accelerated rocker wear, and eventual valve seat damage that escalates a simple push rod replacement into a cylinder head overhaul.
Ordering a push rod that turns out to be the wrong length or diameter variant means the tractor stays on the lift while you wait for a replacement. In a busy repair season, that second round of shipping and waiting can push a one-day repair into a multi-day outage. I once sent a push rod to a contractor who provided only a faded engine serial — it was close but not the right variant for his specific Massey Ferguson build, and his machine waited three extra days for the correct unit [NEED_CITE: valve train component identification challenges in aging agricultural machinery]. Sending a nameplate photo or an image of the old part at the start removes this risk entirely.
Our selected production lines and qualified sourcing partners operate under a single warranty and a single account, so you are not juggling multiple suppliers for one repair. The Push Rod 733817M1 carries the same quality control terms whether it comes from our own facility or a certified manufacturing partner. We accept orders starting from one piece, which matters when a single tractor is down and you do not need ten extras sitting on a shelf. Our technical team handles part identification from a number, a machine model, a photograph, or a nameplate image — whichever starting point you have. Cross-reference verification covers superseded and alternate numbers so you get the correct variant. Sample supply is available for fitment confirmation before you commit to a larger quantity.
If your tractor is already down and you need this push rod moving today, send us whatever identification you have on hand. A part number, a machine model, a photograph of the old component, or a picture of the nameplate — any of these gives our team enough to verify compatibility and confirm stock. We will respond with availability status, shipping options, and an estimated delivery window so you can plan the repair accordingly. No minimum order stands between you and getting a single replacement push rod dispatched.
Q: Is Push Rod 733817M1 currently in stock and ready to ship? A: This push rod is held in our Guangzhou warehouse for immediate dispatch. Stock status is confirmed in real time when you place an inquiry, so we recommend reaching out with your machine model or part number to lock in availability before ordering. Confirmed orders can ship the same day.
Q: Can I order just one piece for an urgent repair? A: Yes. Our minimum order is one piece with no quantity threshold. If a single Massey Ferguson, Oliver, or White tractor is down and you need one push rod to get it running, we dispatch a single unit without requiring you to add filler items to meet a quota.
Q: How quickly can it arrive at my location? A: Arrival timing depends on your destination and chosen shipping method. Express couriers typically deliver within days to most international locations. We quote the estimated delivery window alongside shipping options so you can select based on how urgently the machine needs to return to work.
Q: My nameplate is unreadable — can you identify the part from a photo? A: Yes. Send a clear photograph of the old push rod, the engine block, or any remaining identification markings. Our technical team uses visual details and machine context to cross-reference the correct variant, even when serial plates are worn, painted over, or missing entirely.
Q: What happens if the push rod does not fit when it arrives? A: Our six-month warranty covers manufacturing defects. If a fitment issue arises despite our pre-ship verification, contact us with photos of the received part and the installation context. We work to resolve discrepancies quickly so your machine returns to operation without extended delays.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Keep your Cummins QSB6.7 engine running at peak performance with our Connecting...
Connecting Rod 4956017 for Cummins B3.3 / QSB3.3, forged 4340 alloy steel,...
6538846 Bearing, Replacement for Bobcat Sweeper Attachments — High-carbon chrome steel (AISI...
Single-piece orders ship without batch minimums blocking emergency field repairs.
