J911559 Fan Belt for CASE Loaders & Tractors, polyester-cord reinforced — stocked in our Guangzhou warehouse for immediate pick and dispatch, with no minimum quantity beyond a single piece. Fits CASE 580SK, 590, 90XT, 95XT loaders and 850E, 855D, 2096 tractors among others. When the worn belt number is unreadable, send a machine model or nameplate photo for rapid confirmation.
Stocked and Ready — Guangzhou warehouse holds J911559 fan belts for same-day dispatch when your machine is already down and burning idle hours.
| Parameter | Value |
|---|---|
| Part Number | J911559 |
| Product Type | Belt |
| Cross-Reference | J911559-A, J911559A, 90500580, 73162121, J902309, J903099, J911570 (reference only) |
| Machine Fitment | CASE: 1840, 1845C, 40XT, 480E, 480E LL, 480F, 480F LL, 580K, 580SK, 590, 60XT, 621, 680K, 680L, 70XT, 750K, 75XT, 780C, 780D, 85XT, 90XT, 95XT, 580E, 580SE; New Holland: 1150E, 1150G, 1150H, 1155E, 650, 650G, 750H, 850D, 850E, 850G, 850H, 850K, 855D, 855E, 1896, 2096; Drilling: 6030; Forklift: 584E, 585E, 586E; Sprayer: 3185, SPX3150, SPX3185, SPX3200B; Motor Grader: 845, RG140 |
| Material | High-tensile synthetic rubber with polyester-cord reinforcement |
| Condition | New Aftermarket |
| Warranty | 3–12 months against manufacturing defects |
| Certification | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Belt fraying or cracking visible on inspection | Immediate — machine overheating within hours of continued operation |
| Squealing noise from fan drive at startup | Same-shift replacement to prevent sudden snap under load |
| Complete belt break during excavation or loading | Machine-down emergency — engine temperature rises to critical within minutes |
| Glazed belt surface reducing cooling efficiency | Scheduled swap at next service stop to avoid field failure |
A confirmed Fan Belt J911559 replacement in stock fast shipping is only useful if the right part is identified before it leaves the shelf.
I once had a customer on a Shandong job site send a photo of a worn CASE 85XT nameplate. The characters were barely legible under layers of paint and grit. We shipped what looked like J911559, but the machine needed the alternate pitch variant. That loader sat three extra days. Now every inbound photo gets cross-checked against machine serial ranges before a single belt is pulled from the rack [NEED_CITE: belt pitch and length variance across CASE loader model generations]. When you need a Fan Belt J911559 replacement in stock fast shipping, the first step is making sure the part number is right — not just close.
The Fan Belt J911559 replacement in stock fast shipping promise means nothing if the warehouse shelf is empty when your order drops. High-failure drive belts move fast in aftermarket channels, and back-order gaps stretch into weeks during peak construction seasons. Our Guangzhou facility maintains buffer stock on this specific belt across the full CASE loader and New Holland tractor fitment range, from the compact 1840 skid steer through to the heavy 95XT. One-piece minimum means a single emergency belt ships without padding an order to hit a quantity threshold.
Express courier dispatch from Guangzhou typically reaches most international destinations within a defined window, and air freight provides a cost-controlled alternative for slightly longer transit. We quote arrival estimates at the point of order confirmation, not after the invoice is paid. Each Fan Belt J911559 replacement in stock fast shipping order is packed in individual polybag with rigid cardboard and protective foam to survive courier handling without edge damage [NEED_CITE: aftermarket belt packaging standards for international express freight]. Tracking references are issued on the same day the parcel leaves the warehouse.
The synthetic rubber compound with polyester-cord reinforcement gives this belt the tensile stability needed across continuous high-RPM fan drive operation. Polyester cord resists stretch under the sustained thermal load of engine bay temperatures, which is where cheaper cotton-blend belts typically lose tension and start slipping. The material selection also addresses ozone and oil mist exposure common in loader and tractor engine compartments. High-tensile construction means the belt maintains its pitch profile over thousands of operating hours rather than elongating and walking off the pulley groove.
Shipping the wrong belt to a downed machine is not just a freight loss — it is three days of idle crew, delayed project milestones, and rental penalties stacking up while the correct part is re-sourced. I have seen contractors absorb the cost of a second overnight shipment because the first belt arrived with the wrong tooth profile. Every hour a loader sits still on a mining haulage or port operation costs far more than the belt itself [NEED_CITE: equipment downtime cost impact on construction project schedules]. Confirming fitment from a machine model or nameplate image before dispatch eliminates the guessing cycle entirely.
Self-produced and sourced lines carry identical warranty terms and quality inspection, so a J911559 belt ships with the same accountability regardless of which production run it came from. Eight product categories under one account means if your repair list also calls for filters, seal kits, or undercarriage pins, everything consolidates into one dispatch. Guangzhou warehouse stock allows same-day pick on common belts. Part identification works from a part number, machine model, a photograph, or a nameplate image — whichever is the only thing you have left on a faded machine. Cross-reference verification covers superseded numbers like J902309 and J903099 so alternate references resolve to the same correct part. Samples are available for fitment confirmation before you commit to bulk quantities.
Q: Is the J911559 belt in stock right now? A: Guangzhou warehouse maintains ready stock on the J911559 fan belt for immediate dispatch. Real-time availability is confirmed at inquiry, and we can usually process same-day pick and pack. If a specific variant or superseded number like J902309 is needed, we verify fitment before releasing stock.
Q: What is the minimum I can order? A: One piece. There is no bulk requirement or minimum order threshold on the J911559 belt. A single emergency replacement ships on the same terms as a larger consignment, which matters when your machine is already down and waiting for parts.
Q: How fast can it arrive at my location? A: Express courier from Guangzhou typically reaches international destinations within a defined transit window, with air freight as a cost-effective alternative. Freight mode and estimated arrival are quoted upfront at order confirmation, not after payment, so you can plan crew schedules around the delivery date.
Q: The nameplate is worn — how do I confirm the right belt? A: Send a photo of whatever is legible: the old belt markings, the machine model badge, or the engine plate. We cross-reference against the CASE and New Holland fitment database to match the correct belt variant, including superseded numbers, before anything ships.
Q: What happens if the belt arrives and does not fit? A: Our warranty covers manufacturing defects for 3–12 months. If the fitment issue traces back to our identification error, we resolve it directly. We recommend confirming machine model and serial details at inquiry stage to prevent mismatch, and samples are available for fit-check before bulk orders.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Keep your Harley Touring Electra Glide FLHT or FLTR riding smoothly with...
78-1918 / 78-1543 Alternator Belt, 8-rib 12.7 mm pitch EPDM with aramid...
Drive Pump Belt 6736775 replacement for Bobcat loaders — 1477mm length, 30.2mm...
Arrival window confirmed at quote stage so you plan the repair, not...
