Fan Belt 6718730 (cross-reference) for Bobcat Skid Steer Loaders, EPDM compound with aramid-reinforced tensile cord — fits 5600, 773, S150–S205, T180, T190.
Dispatch window quoted at order confirmation for this replacement belt.
Ready to Ship — Fan Belt 6718730 held in Guangzhou stock for Bobcat skid steer loaders, one piece minimum dispatched within days.
| Parameter | Value |
|---|---|
| Part Number | 6718730 |
| Product Type | Belt |
| Cross-Reference | 6718730 (reference only) |
| Machine Fitment | Bobcat 5600, 773, S150, S160, S175, S185, S205, T180, T190 |
| Material | EPDM (Ethylene Propylene Diene Monomer) rubber compound |
| Tensile Cord | Aramid-reinforced |
| Groove Tolerance | ±0.15 mm |
| Operating Temperature | Up to 120°C |
| Condition | New Aftermarket |
| Warranty | 3–12 months against manufacturing defects |
| MOQ | 1 piece |
| Standard | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Squealing noise at engine start or under load | Immediate — belt slippage causes overheating risk |
| Visible cracking or fraying on belt ribs | Schedule within same shift — structural failure imminent |
| Belt snapped during operation | Critical — machine is non-operational until replaced |
| Glazed or shiny belt surface indicating slip | Urgent — reduced cooling fan efficiency affects engine temperature |
This fan belt 6718730 in stock replacement ships from Guangzhou warehouse the same week your order is confirmed.
When a skid steer goes down mid-shift at an urban excavation site or a port material handling yard, every hour the engine sits cold is an hour billed against your contract. I have watched site supervisors cycle through three different suppliers just to confirm whether a worn belt number is still valid, losing days to email chains while the loader collects dust. [NEED_CITE: unplanned downtime cost per hour for compact track loaders in contract work]. The bottleneck is rarely the part itself — it is the gap between "I need this" and "confirmed, on the way."
Fan Belt 6718730 in stock replacement inventory at our Guangzhou facility covers the Bobcat skid steer range that sees the highest belt wear: S150 through S205, T180, T190, and the older 773 and 5600 models. Because belts are among the fastest-failure consumables on any loader working eight to twelve hour shifts under full load, they occupy the front-line stock zone — not a back-order list. One piece is the minimum, so a single downed machine does not force you into a bulk commitment you do not need.
More than half the belt inquiries I handle start with a photograph of a cracked, oil-stained loop where the printed part number faded two rebuilds ago. You send the image along with the machine model plate — even if that plate is painted over or half-missing — and we cross-check the fan belt 6718730 in stock replacement against your specific serial range. This is how a twenty-minute exchange replaces a two-day parts chase. [NEED_CITE: cross-reference verification methods for superseded aftermarket belt numbers].
Express courier, air freight, and sea freight are all quoted at inquiry stage with realistic transit estimates to your region, not padded buffer numbers. For a single belt heading to a repair shop in Southeast Asia, express typically arrives within days. Air freight suits small consolidated orders to the Middle East or Africa. Sea freight is an option only when the machine is not yet down and you are topping up consumable stock. The shipping mode is your call, but the arrival estimate is given before payment.
EPDM rubber is selected for belt drive applications because it resists heat aging and ozone cracking — the two primary killers of belts working in open-engine-bay environments where ambient dust and diesel exhaust concentrate. On a Bobcat S185 running a twelve-hour demolition shift, underhood temperatures cycle constantly as the loader alternates between travel and stationary hydraulic work. The aramid-reinforced tensile cord carries the load without stretching, maintaining groove engagement across the pulley set. Groove tolerance at ±0.15 mm keeps the belt seated properly, reducing the side-slip that causes rib wear. Operating temperature rated to 120°C covers the sustained heat load these machines generate during continuous summer shifts. [NEED_CITE: EPDM belt performance characteristics in high-temperature mobile equipment applications].
Ordering the wrong belt variant for your machine model means the machine stays down through a return shipment, a second delivery, and another installation window. I have seen a rental operator lose an entire week because the replacement belt arrived with a slightly different rib count that almost seated but slipped under load — close enough to install, useless enough to fail within hours. [NEED_CITE: belt rib profile mismatch consequences in skid steer cooling systems]. The downtime cost on a contracted loading zone far exceeds the price of confirming fitment before dispatch. This is why we verify by machine model and serial range, not just by the number printed on a belt that may have been replaced with an incorrect variant years ago.
Self-produced and sourced lines carry the same QC and warranty terms, so you do not sort through different coverage levels within one order. Eight product categories under a single account mean the belt arrives in the same consignment as the filters, seals, and tensioner you also need — one dispatch, one tracking number. One-piece minimum order means an emergency repair does not wait for a threshold. Guangzhou warehouse stock on fast-failure items like this fan belt 6718730 in stock replacement keeps lead times measured in days. Part identification from number, machine model, or photograph means a worn nameplate does not become a blocker.
Send the part number or a clear photograph of the worn belt along with your Bobcat machine model. If the nameplate is unreadable, a photo of the engine compartment and the old belt's cross-section profile is enough to confirm fitment. We respond with stock status, freight options, and an estimated arrival window — not a callback promise.
Q: Is this belt in stock and when can it ship? A: Fan Belt 6718730 (reference only) for Bobcat skid steer loaders is held in ready-to-ship stock at our Guangzhou warehouse. Orders confirmed during business hours can dispatch the same week. Exact timing depends on the freight mode selected — express courier moves fastest for single-piece orders, while air freight suits consolidated shipments. We provide the dispatch date and estimated arrival at quote stage.
Q: Can I order just one piece for an emergency repair? A: Yes. The minimum order is one piece. There is no bulk threshold required before a single fan belt ships. This supports urgent field repairs where one loader is down and you need it running before the next shift, without committing to quantities beyond what the immediate job requires.
Q: How do I confirm fit if the belt number is worn off? A: Send a photograph of the old belt and your Bobcat machine model plate. Even with a painted-over or damaged nameplate, the combination of machine model and belt cross-section image allows our technical team to verify whether fan belt 6718730 (reference only) matches your specific serial range and engine variant.
Q: What are the express versus air freight delivery windows to my region? A: Express courier typically delivers within days for single-piece belt shipments to most destinations. Air freight adds handling time but works well when you are consolidating several parts. Exact transit windows depend on destination and are quoted upfront with your freight options before you commit to the order.
Q: What happens if the belt arrives and does not fit my machine? A: If the belt is confirmed against your machine model before dispatch and still does not fit due to a verification error on our side, we arrange resolution under our warranty terms. This is why we request machine model and serial details at inquiry stage — to prevent fitment mismatches before the shipment leaves the warehouse.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Clutch Drive Belt 3211218 for Polaris Ranger, 26C4057 cross-reference — kept in...
Ships within 2-5 working days on confirmed stock, with arrival timing quoted...
Belt Tensioner Assembly 3936213, Complete Unit for Cummins Engines — replacement for...
V-Belt 9001A-96003 for Toyota 4Y Forklifts — 960 mm Pitch Length, Aramid...
