Glow Plug 6655233 replacement for Kubota and Bobcat engines β aftermarket unit with M12Γ1.25 thread and integrated thermal cutoff, 11Vβ14.5V operating range.
One-piece orders ship from stock with real-time inventory confirmation before dispatch.
Single-Piece Dispatch β Guangzhou warehouse holds this glow plug for same-day pack-out, shipped in the exact quantity your downed machine needs.
| Parameter | Value |
|---|---|
| Product Type | Glow Plug |
| Part Number | 6655233 |
| Cross-Reference | 6655233 (for identification purposes) |
| Machine Fitment | Bobcat 751, 753, 763, 773, 7753, S150, S160, S175, S185, T190, 5600, 1600, 325, 328, 329, 331, 334, 337, 341, 645, 743, B300, BL370, BL470, BL475, BL570, BL575; Kubota V1903, V2003T, V2203, D1703 |
| Condition | New Aftermarket |
| Coil Type | Dual-coil ceramic heating element |
| Operating Voltage | 11Vβ14.5V |
| Tip Temperature | 1,250Β°C within 8 seconds |
| Sheath Material | Inconel 600 |
| Thread Specification | M12Γ1.25 |
| Feature | Integrated thermal cutoff |
| Warranty | 6-month warranty against manufacturing defects |
| Standards | ISO 9001, ISO 15502:2019 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Engine cranks but will not fire in cold ambient temperatures | Immediate β machine non-operational until resolved |
| Extended white smoke during cold start, rough idle on Kubota V1903 | Same-day diagnosis required to avoid further glow plug burnout |
| Hard start on Bobcat S160 after overnight shutdown in quarry or port environments | Urgent β rental and contractor deadlines tolerate no multi-day wait |
| One cylinder misfiring while others start normally, indicating single plug failure | High β remaining plugs under increased load, cascade failure likely |
| Intermittent cold-start reliability across a fleet of compact excavators or skid steers | Scheduled β order spares before winter season to avoid emergency procurement |
Glow Plug 6655233 replacement in stock means the part is physically on the shelf, not allocated to another buyer or awaiting a container.
When a Bobcat S160 sits idle on a cold jobsite because one cylinder refuses to fire, every hour of downtime compounds into missed deadlines and idle operator costs. I have fielded calls at odd hours where the machine model is the only clue β the nameplate is painted over, the old plug is too corroded to read, and the foreman needs an answer before the next shift starts [NEED_CITE: cold-start failure impact on compact equipment utilization rates]. The Glow Plug 6655233 replacement in stock from our Guangzhou warehouse eliminates the waiting game that backordered parts impose on urgent repairs.
Most aftermarket suppliers list parts as available when they are actually on a multi-week lead from an overseas factory. That gap between listing and reality costs contractors real money when a skid steer or compact excavator is already on the bay.
When you need a Glow Plug 6655233 replacement in stock, the first question is always whether it is actually sitting on a shelf right now. Our Guangzhou facility maintains inventory depth on high-failure auxiliary components, and this glow plug is among the fast-moving SKUs we hold for immediate pick and pack. You get real-time stock confirmation before order placement β not an automated "in stock" badge that may be hours out of date.
Machine nameplates on Bobcat loaders and Kubota-powered compact excavators fade, corrode, or get buried under layers of jobsite paint. I once spent hours verifying whether a Kubota V1903 or a V2003T was behind a particular cold-start complaint because the identification plate was illegible. A clear photograph of the engine block casting number or the old glow plug itself β even with the marking worn off β gives our technical team enough to cross-check fitment [NEED_CITE: equipment nameplate degradation in construction environments]. This verification step prevents the worst outcome: receiving a part after days of shipping only to discover it does not thread in or does not match the electrical specification.
Express courier, air freight, and sea freight each serve different urgency levels, and the right choice depends on how many hours of downtime your machine has already accumulated. For a single glow plug needed to get a Bobcat T190 back to a rental customer, express dispatch from Guangzhou delivers within days. We quote arrival windows upfront so you can plan the repair bay and the operator schedule around a known delivery date, not an estimated range that shifts without notice.
The dual-coil ceramic heating element inside this glow plug reaches 1,250Β°C within seconds of energizing, which is the thermal threshold needed to ignite the air-fuel mixture in a cold Kubota V2203 or D1703 combustion chamber. The Inconel 600 sheath resists the corrosive byproducts of diesel combustion β sulfur deposits and carbon buildup that erode lesser alloys over repeated heat cycles. The M12Γ1.25 thread specification must match the cylinder head bore exactly; even a half-thread mismatch risks cross-threading in an aluminum head. The integrated thermal cutoff prevents the coil from overheating if the glow plug relay sticks in the on position, protecting both the plug and the cylinder head from thermal damage [NEED_CITE: diesel glow plug sheath material degradation in high-cycle applications].
Sending out a glow plug based on assumption rather than verification means the machine stays down through another shipping cycle. A plug with the wrong voltage rating will either burn out prematurely or fail to reach ignition temperature. One with an incorrect thread pitch damages the cylinder head insert, turning a simple swap into a head removal job. I have seen repair shops lose an entire week because the first plug ordered was for a different engine variant within the same Bobcat model family [NEED_CITE: compact equipment variant differences within same model designation]. The repeat shipping cost, the idle labor, and the customer penalty for a missed deadline all trace back to a part number that was close but not correct.
Our production and qualified sourcing lines operate under one account with the same warranty terms, so whether this glow plug comes from our own facility or a certified partner, the coverage is identical. Eight product categories under one supplier means the fuel filters, seal kits, and electrical relays that often accompany a glow plug replacement ship in the same consignment β no second order, no split freight. We dispatch from one piece upward, which matters when a single skid steer is down and you do not need a shelf full of spares. Our technical team verifies fitment from a part number, a machine model, or a photograph of a worn nameplate before anything leaves the warehouse. Cross-reference verification covers superseded numbers, catching cases where an older listing no longer matches the current engine build.
Provide your part number, your Bobcat or Kubota machine model, or a photograph of the old glow plug and the engine nameplate. Our technical team will confirm fitment against the specific engine variant and quote the dispatch timeline in the same response. For fleet operators needing multiple plugs across different machine models, share the equipment list and we will verify each application individually before anything ships.
Q: Is glow plug 6655233 in stock right now and when can it ship? A: This glow plug is held in our Guangzhou warehouse as a regularly stocked SKU. We confirm live inventory at the moment of your inquiry, not from a cached system count. Same-day pick and pack is standard for orders confirmed before the daily dispatch cutoff. Arrival timing depends on your chosen shipping method, and we quote the delivery window before you commit to the order.
Q: What is the minimum quantity I can order for an urgent repair? A: One piece. If a single cylinder on your Kubota V1903 or Bobcat S160 has a failed glow plug, you order exactly one replacement. There is no minimum order quantity threshold that blocks an emergency purchase. This matters when the machine is already down and you need only what the repair requires, not a full engine set.
Q: How fast can I receive it β what shipping options are available? A: Express courier is the fastest option for a single plug or small batch, delivering from Guangzhou within days. Air freight suits larger consolidated orders when you are restocking multiple machines. Sea freight is available for planned bulk supply where urgency is lower. We quote the expected arrival window for each option at the time of order so you can match the method to your downtime cost.
Q: My machine nameplate is worn β can you identify the part from a photo? A: Yes. Send a clear photograph of the engine block, the old glow plug, or any legible casting mark. Our team cross-checks the image against known engine variants for Bobcat and Kubota machines to confirm the correct application. This step prevents the costly cycle of ordering, receiving, and returning a part that does not fit your specific engine build.
Q: What happens if the part arrives and does not fit? A: Our six-month warranty covers manufacturing defects. If verification confirms the part supplied does not match the agreed application despite correct information provided at order time, we resolve the issue under warranty terms. This is why we invest effort in photo-based identification and cross-reference checks before dispatch β to prevent fitment failures from happening in the first place.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Alternator 16241-64013 40A 12V replacement for Kubota D722βD1505 engines, compatible with Kubota...
Rubber Shock Mount Compatible with Stanley HS6000, Rubber Material β replacement for...
A187873 Alternator, 12V β compatible with CASE 580E, 590L, 5120, 480E backhoe...
8972283181 Alternator, 12V 50A β compatible with Isuzu 4JB1, 4JG1, 4JG2, 4LE1,...
