6669034 Cooling Fan Belt, 11×1055LA Serpentine Type — replacement for Bobcat 751, 753, 763, 773, S130 skid steer loaders. Heat-resistant rubber with polyester cords ensures reliable tension under continuous high-RPM cooling fan duty.
Arrival timeline locked in when you place the order, no open-ended waiting.
Single-Piece Emergency Dispatch — Guangzhou warehouse holds this cooling fan belt ready for same-week air freight, so one downed skid steer does not stall a grading contract.
| Parameter | Value |
|---|---|
| Part Number | 6669034 |
| Product Type | Belt |
| Cross-Reference | 6669034 (reference only) |
| Machine Fitment | Bobcat 751, 753, 763, 773, S130 |
| Belt Type | 11×1055LA serpentine belt |
| Inner Circumference | 1005 mm |
| Outer Circumference | 1005 mm |
| Thickness | 8 mm |
| Width | 11 mm |
| Material | Heat and oil resistant rubber with internal polyester cords |
| Condition | New Aftermarket |
| Warranty | 3–12 months against manufacturing defects |
| MOQ | 1 piece |
| Standards | ISO 9001, ISO 4184 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Engine overheating under sustained load on demolition sites | Immediate — machine cannot operate without functional cooling |
| Squealing noise from fan drive during cold start | High — belt slippage accelerates wear and risks sudden snap |
| Visible cracking or glazing on belt surface after extended quarry use | Planned — schedule replacement before next shift to avoid mid-job failure |
| Fan speed drop noticed during material handling in port terminals | Same-day — reduced airflow compromises hydraulic oil cooling as well |
| Belt fraying at edges on grading attachments | Urgent — frayed cords can jam pulley and damage tensioner |
A replacement cooling fan belt 6669034 ships from Guangzhou stock within days, not weeks.
When a Bobcat 753 throws a belt on a demolition site, the operator is not the only one losing money — every loader, truck, and crew member downstream sits idle. Waiting for a supplier to confirm whether a part number is still current, or whether the minimum order allows a single piece, burns hours that compound into missed deadlines [NEED_CITE: equipment downtime cost impact on small contractor project schedules]. The Cooling Fan Belt 6669034 replacement in stock fast shipping model eliminates that waiting gap: stock is confirmed before you pay, one piece ships without bulk padding, and the arrival window is quoted at the time of order.
Part identification starts the moment a message arrives — whether that is a clear part number, a machine model, or a photograph of a worn nameplate. For this Cooling Fan Belt 6669034, fitment covers Bobcat 751 through S130 skid steer loaders, and the cross-reference is verified against superseded listings before confirmation goes out. If the nameplate is painted over or illegible, a photo of the old belt alongside a ruler is usually enough to confirm width and circumference match. The reply lands within hours because the warehouse team works across time zones to catch inquiries from contractors running night shifts.
Once the order is placed, the belt moves from Guangzhou warehouse shelf to courier within one working day for express, or joins the next air freight consolidation for cost-sensitive shipments. Express typically reaches most international destinations within a working week, while air freight adds a few days but keeps the cost reasonable for a single piece [NEED_CITE: international express versus air freight transit benchmarks for small parcel machinery parts]. Packaging is a reinforced carton sized for the belt coil, protecting the polyester cords from kinking during transit. Real-time tracking is provided so the workshop knows exactly when to schedule the refit.
The 11 mm width and 8 mm thickness place this belt in the standard V-profile class used across Bobcat skid steer cooling circuits. The 1005 mm inner circumference must match the fan pulley and crankshaft pulley center distance precisely — even a few millimeters off forces the tensioner to compensate beyond its range, causing premature slip. Heat and oil resistant rubber compound is specified because the belt runs adjacent to the engine block where ambient temperatures climb during sustained loader cycles. Internal polyester cords provide tensile stability so the belt does not stretch past its service interval under continuous fan load.
Sending the wrong belt to a downed machine means the loader sits for another full freight cycle. A belt that is too long will not tension correctly and will slip within the first hour of operation, generating enough heat to degrade the rubber compound rapidly. A belt that is too short may not mount at all, or worse, overloads the fan bearing and creates a secondary repair [NEED_CITE: belt tension deviation effects on auxiliary drive bearing life in compact loaders]. Every misidentified part number in an emergency order doubles the total downtime, which is why confirmation relies on cross-referencing the machine model against the actual fitment list rather than trusting a single source.
The Guangzhou warehouse keeps common failure items like this Cooling Fan Belt 6669034 on the shelf, not on a production schedule waiting for a batch minimum. One piece is a valid order — no bulk requirement blocks an emergency repair for a single machine. Part identification works from a part number, a machine model, or a photograph of the nameplate, so the buyer does not need to guess which variant fits. The same account covers eight categories of skid steer components, meaning if the tensioner or idler pulley also needs replacement, those ship in the same consignment. Quality inspection records and warranty documentation travel with every dispatch, covering manufacturing defects for up to twelve months.
Provide the part number 6669034, or a clear photograph of the machine nameplate and the old belt if the number is unreadable. The response will confirm stock status, quote the arrival timeline for your destination, and specify whether express or air freight fits your deadline. Include the Bobcat model designation so the fitment list can be verified before the belt leaves the shelf.
Q: Is this cooling fan belt in stock and how fast can it ship? A: The belt is held in Guangzhou warehouse stock for immediate processing. Express dispatch typically moves within one working day of order confirmation, with arrival timelines quoted at the point of inquiry based on your destination.
Q: Can I order just one piece for an emergency repair? A: Yes. The minimum order is one piece with no bulk requirement. This is designed for workshops and contractors who need a single belt to get a downed Bobcat skid steer running again without waiting for a production batch.
Q: How do I confirm fitment if the nameplate is unreadable? A: Send a photograph of the old belt alongside a measuring tape showing width and circumference. The team cross-references those dimensions against the 751, 753, 763, 773, and S130 fitment list to verify the match before shipping.
Q: What happens if the belt I receive is defective? A: The belt carries a warranty of 3–12 months against manufacturing defects. A replacement ships at no additional cost once the defect is confirmed through photographs or a return inspection, depending on the nature of the failure.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Keep your John Deere Gator XUV running strong with this reliable Clutch...
Keep your Cummins 6C8.3, B6.7, or ISB6.7 engine running strong with our...
Drive Belt 7177671 (cross-reference only) for Bobcat S630 S650 T630 T650 T870,...
Belt Set 78-1341 78-603 78-629, replacement for Thermo King SB Series, includes...
