Belt Tensioner Assembly 7167165 7274780 — replacement for Bobcat S510–S850 and T550–T870 skid steer and track loaders, new aftermarket condition with 3–12 month warranty. Guangzhou warehouse stock enables single-piece dispatch for emergency repairs, with fitment confirmed from machine model, serial number, or photograph of the worn unit. Express, air, and sea freight options quoted with arrival timelines at order placement. Arrival window confirmed before dispatch.
Ships Same Day — Guangzhou warehouse holds belt tensioner assemblies for Bobcat loaders ready to dispatch within working hours, not weeks.
| Parameter | Value |
|---|---|
| Part Number | 7167165 7274780 7273503 |
| Product Type | Belt Tensioner |
| Cross-Reference | 7167165, 7274780, 7273503, 7196910, 7201887, 7145358, 6564692, 7152658, 53DM12, 3GM12110, 59CM835, 7CM12140, 7273604 (cross-reference only for identification purposes) |
| Machine Fitment | S510, S530, S550, S570, S590, S595, S630, S650, S740, S750, S770, S850, T550, T590, T595, T630, T650, T740, T750, T770, T870 |
| Condition | New Aftermarket |
| Warranty | 3-12 months against manufacturing defects |
| MOQ | 1 piece |
| Pulley Reference | 7167165 |
| Rocker Arm Reference | 7274780 |
| Spring Reference | 7145358 |
| Bolt References | 3GM12110, 59CM835 |
| Nut Reference | 53DM12 |
| Quality Standard | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Squealing or chirping noise from engine bay during startup | Immediate — belt slippage accelerates wear on adjacent drive components |
| Visible wobble or lateral play in the tensioner pulley | High — uneven belt tracking leads to sudden snap under load |
| Belt throwing or repeated derailment during operation | Critical — machine cannot perform work cycles safely |
| Cracked or fatigued tensioner spring on visual inspection | Scheduled — replace before spring failure causes belt loss |
| Excessive vibration transmitted through belt drive system | High — vibration damages alternator bearings and fan mounts |
A Belt Tensioner Assembly in stock fast shipping replacement for Bobcat loaders leaves our Guangzhou warehouse within working days, not weeks.
When a skid steer or compact track loader goes down mid-job, the clock starts. I recall a contractor in São Paulo during rainy season whose Bobcat S510-S850 series machine sat idle while he waited for part number confirmation from multiple sellers — each asking for details the worn nameplate no longer showed. Hours turn into days when you are stuck in that loop [NEED_CITE: typical lead times for aftermarket belt drive components in compact loader repair]. A Belt Tensioner Assembly in stock fast shipping replacement for Bobcat machines eliminates that wait by keeping common Bobcat belt drive items on the shelf and ready to move.
The real cost is not the part itself — it is the crew standing by, the rental contract bleeding, and the next job slipping. This belt tensioner assembly ships from stock so the machine returns to the jobsite while the project timeline still holds.
Getting the right Belt Tensioner Assembly in stock fast shipping replacement for Bobcat equipment to a downed machine starts with identification. Send a photograph of the worn component, a shot of the machine nameplate, or simply the machine model — our technical team confirms fitment within hours, not business days. This matters when the pulley reference 7167165 or the rocker arm reference 7274780 has been superseded across machine generations and an older number no longer matches the current build. We cross-check against the full reference list including 7196910, 7201887, and 7273604 to land on the correct assembly.
One-piece minimum order means you are not forced to buy surplus inventory for a single emergency repair. Whether it is one S750 or one T770 sitting in the yard, the order goes through without hitting a quantity wall.
Once fitment is confirmed and the order is placed, the transit timeline becomes the next bottleneck. Express courier delivers to most international destinations within days, air freight covers regional hubs within a week, and sea freight handles planned restocking at lower cost. Each option comes with an estimated arrival window quoted at the time of order — no guessing, no chasing [NEED_CITE: international freight transit time variables for construction parts]. The Guangzhou warehouse location sits close to major shipping ports and air cargo terminals, which shortens the handoff from shelf to carrier.
Packaging is built for the selected freight method. Single-piece tensioner assemblies ship in reinforced cartons suitable for express handling, protecting the pulley face and spring mechanism from transit damage.
The belt tensioner assembly combines several interacting components, and each specification directly affects performance on the machine. The pulley, referenced as 7167165, must maintain true concentricity to prevent belt flutter at operating RPM — a pulley that runs off-center creates harmonic vibration that transfers through the entire belt drive system. The rocker arm, referenced as 7274780, provides the pivoting leverage that translates spring force into belt tension; its pivot bore and bushing surface must hold tolerance or the arm develops play that shows up as belt tracking drift.
The spring, referenced as 7145358, sets the actual tension value applied to the belt. A spring that has lost its rate due to fatigue will under-tension the belt, causing slip and heat buildup on the pulley grooves. The fastener set — bolts referenced as 3GM12110 and 59CM835, plus the nut referenced as 53DM12 — must match the original thread pitch and grade to maintain clamp load through thermal cycling. Substituting lower-grade hardware risks fastener stretch and tensioner migration under vibration [NEED_CITE: fastener grade requirements for engine-mounted belt drive components].
Ordering the wrong belt tensioner based on an outdated reference number means the machine stays down through a second shipping cycle. I have seen repair shops receive a tensioner that physically bolts on but positions the pulley several millimeters off the belt plane — close enough to run, wrong enough to shred the belt within operating hours. That is not a parts problem; it is an identification failure that costs the shop credibility with its customer.
Cross-reference tables copied between sellers often carry forward errors from superseded numbers. The reference 6564692 or 7152658 may appear in a listing that does not account for variant differences across S-series and T-series builds. Verifying against the machine model and serial range catches these mismatches before the carton ships [NEED_CITE: aftermarket part number supersession errors in compact equipment catalogs].
Guangzhou warehouse stock on Bobcat belt drive items means this tensioner assembly does not enter a production queue — it ships from the shelf. One-piece minimum order supports emergency repair on a single downed loader without padding the purchase with unneeded stock. Part identification works from the part number, the machine model, or a photograph of the worn component or nameplate when markings have faded. Cross-reference verification covers the full superseded and alternate number range, including references like 7196910 and 7273604. A sample unit can be supplied for fitment confirmation before any bulk commitment is made, reducing risk for distributors stocking across multiple Bobcat models. The technical team remains available to confirm compatibility and component grade for specific machine serial ranges.
Provide the part number from the old tensioner, the Bobcat machine model such as S650 or T770, or a clear photograph of the nameplate or worn component. We return a fitment confirmation, real-time stock status, and an estimated arrival window by your preferred shipping method — typically within hours of receiving your inquiry.
Q: Is this belt tensioner assembly currently in stock and when can it ship? A: Belt tensioner assemblies for Bobcat S510 through S850 and T550 through T870 loaders are stocked in our Guangzhou warehouse. Orders confirmed during working hours typically dispatch within the same or next working day. Express, air, and sea freight options are quoted with estimated arrival windows at the time of order so you can plan the repair schedule around a known delivery date.
Q: Can I order just one piece for an emergency repair? A: Yes. The minimum order quantity is one piece. There is no bulk requirement or forced multiplier. A single belt tensioner assembly ships independently to address one downed machine without requiring you to carry surplus inventory. This supports workshops and contractors who need an immediate fix rather than a stocking program.
Q: How do I confirm fitment if the machine nameplate is worn or painted over? A: Send a photograph of the worn tensioner assembly, the machine model badge, or any readable marking on the existing component. Our technical team cross-references against the full number range including superseded references and confirms which assembly variant matches your specific machine build. Fitment verification typically completes within hours of receiving your images.
Q: What happens if the part received does not match the machine? A: If fitment verification was completed before dispatch and the received part still does not match, contact us immediately with photographs of the component and the machine mounting points. We arrange resolution under our warranty terms, which cover 3-12 months against manufacturing defects and identification errors traced to our confirmation process.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Timing Belt Installation Pin 02992037 for Deutz 1011/2011 engines, hardened steel, 2...
Keep your Bobcat skid steer loader running at peak efficiency with this...
Belt Tensioner Pulley 6735884 for Bobcat Skid Steer Loaders, New Aftermarket Pulley...
Ships within 2-5 working days on confirmed stock, with arrival timing quoted...
