AR90340 RE37089 Stop Solenoid, 12V, IP67 Sealed — in-stock replacement for Perkins, John Deere, GM, and Ford diesel engines. Guangzhou warehouse ready for same-day dispatch on orders placed before cutoff, with MOQ of just 1 piece for urgent single-unit repairs. Send a worn nameplate photo or machine model for fitment verification within 2 hours.
Single-Piece MOQ — Even one shutoff solenoid ships immediately from Guangzhou stock, eliminating the bulk-order delays that strand equipment on site.
| Parameter | Value |
|---|---|
| Part Number | AR90340 RE37089 AR48219 AR51796 RE62240 |
| Product Type | Stop Solenoid |
| Cross-Reference | RE62240, RE37089, AR48219, AR51796, AR90340, 8094900, 14067411, 15577535, 26435149 (reference only) |
| Machine Fitment | John Deere Tractor 1020, 2020, 2030, 2520, 3010, 3020, 4000, 4020, 4320, 4520, 4620, 5020, 6030; Combine 3300, 9400; Harvester 5200, 5400, 7445, 9900, 9910, 9920, 9930; Loader 210C, 300B, 300D, 310D, 315D; Hay Cutting 2250, 2270, 2280, 2320, 2420, 3430, 3830 |
| Voltage | 12V |
| Actuation Voltage Range | 10–14V |
| Insulation Class | Class H |
| Operating Temperature | Up to 180°C |
| IP Rating | IP67 |
| Sealing | Dual O-rings with molded elastomer housing |
| Actuation Force Tolerance | ±3% |
| Dimensional Tolerance | ±0.05 mm |
| Surface Treatment | Zinc-nickel plating (15 μm) |
| Core Material | Low-carbon steel |
| Condition | New Aftermarket |
| Warranty | 6-month standard warranty against manufacturing defects |
| MOQ | 1 piece |
| Standards | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Engine cranks but will not shut off when key is turned | Immediate — safety-critical, machine cannot be left running unattended |
| Solenoid clicks but fuel rack does not move | High — engine may stall unpredictably under load |
| Intermittent shutoff, sometimes requires manual fuel cutoff | High — failure can escalate without warning during harvesting shifts |
| Burnt coil smell or visible heat damage on solenoid body | Immediate — electrical fault risks further wiring damage |
| No response from solenoid, completely open or closed circuit | Immediate — machine non-operational until replaced |
A confirmed 12V fuel injection pump shutoff solenoid in stock fast shipping replacement leaves the warehouse the same day the order is placed.
A harvester sits idle in the field while the operator waits for someone to confirm whether RE37089 or AR90340 is the correct number for their specific pump build. That waiting period stretches from hours into days when suppliers require minimum quantities or refuse to identify parts from a faded nameplate. I have watched machines lose an entire harvesting window because the wrong Stanadyne pump variant was assumed from a blurry photograph [NEED_CITE: common causes of misidentified fuel system components in agricultural machinery]. The cost is not the part — it is the crew standing around and the crop timing that does not pause for logistics.
When a machine is already down, the first question is whether the part is on the shelf. This 12V fuel injection pump shutoff solenoid in stock fast shipping replacement is held in Guangzhou warehouse inventory, with the 12V variant covering the broadest fitment range across John Deere tractors and Perkins-powered equipment. Orders placed before the daily cutoff dispatch the same day. There is no minimum order gatekeeping — a single solenoid for an emergency repair ships under the same terms as a bulk consignment, so a workshop is never forced to buy ten units when the machine on the bench needs one.
Nameplates on Stanadyne and Roosamaster pumps fade, paint over, or corrode until the original number is unreadable. In those situations, a photograph of the pump body, the mounting flange, or even the old solenoid next to a ruler gives enough information to confirm compatibility. My own rule after one costly misjudgment: I never ship these solenoids based on assumption alone. Send a photo or the machine model, and compatibility is verified within two hours. Cross-reference numbers including RE62240, AR48219, and AR51796 (reference only) are checked against superseded and alternate listings to catch mismatches before the package leaves [NEED_CITE: cross-reference verification practices for fuel injection pump solenoids].
Express courier delivers in roughly 3 to 7 days for most international destinations, which is the practical choice when a combine or loader is sitting non-operational. Air freight covers the 7-to-12-day window for slightly larger orders where per-unit freight cost matters. Sea freight fills the 25-to-40-day range for stocking orders where urgency is lower. Each option is quoted with a delivery window at the time of order, not revealed weeks later. Tracking is active from the moment the package leaves Guangzhou, so a site supervisor knows whether the 12V fuel injection pump shutoff solenoid in stock fast shipping replacement is on the aircraft or clearing customs.
The IP67 rating means this solenoid survives direct water jets and temporary submersion — relevant when pressure-washing an engine bay or operating in flooded field conditions. Class H insulation sustains continuous winding temperatures up to 180°C, which matters on Perkins 1006-6T installations where the solenoid sits close to exhaust manifolds. The 10–14V actuation range accommodates the voltage sag that occurs during cranking on a 12V system, so the solenoid engages reliably even when the battery is under load. Zinc-nickel plating at 15 μm thickness provides corrosion protection that outperforms standard zinc in humid and salt-air environments [NEED_CITE: zinc-nickel plating corrosion resistance standards for automotive electrical components].
Rushing an order without verifying the pump variant leads to a solenoid that physically bolts on but does not stroke the fuel rack correctly. The machine starts and then refuses to shut off, which is a more dangerous failure than not starting at all. A second round of shipping follows — return the wrong unit, confirm the correct number, wait again. On a hay cutting operation during a narrow weather window, that cycle can mean missing the cut entirely [NEED_CITE: economic impact of harvest delays due to equipment downtime]. The 12V fuel injection pump shutoff solenoid in stock fast shipping replacement is only useful if it is the right one, which is why photo verification before dispatch is non-negotiable here.
Selected part lines are produced in-house while the remainder comes from qualified ISO-certified manufacturing partners, and both carry identical QC and warranty terms — so there is no quality gap between self-produced and sourced supply. Eight product categories operate under one account, meaning a repair center can add seals, filters, and diagnostic tools to the same order without opening new supplier relationships. The Guangzhou warehouse stocks common items for immediate dispatch, and identification is supported from a part number, machine model, photograph, or nameplate image. A technical team confirms compatibility and grade before shipment, and sample supply is available for fitment confirmation before any bulk commitment. Cross-reference verification covers superseded and alternate numbers, catching errors that copied tables often carry forward. The 6-month warranty against manufacturing defects includes free replacement on valid claims.
Provide the part number you have, the machine model, or a photograph of the pump nameplate and old solenoid. The response will confirm whether this 12V fuel injection pump shutoff solenoid in stock fast shipping replacement fits your specific pump build, along with the dispatch date and freight timeline for your destination.
Q: Is this solenoid in stock and when can it ship? A: The 12V variant is held in Guangzhou warehouse inventory for immediate dispatch. Orders placed before the daily cutoff ship the same business day. You receive a confirmed dispatch date and tracking number at the time of order, not an estimated lead time that shifts later.
Q: What is the minimum I can order for an urgent repair? A: One piece. There is no minimum order quantity requirement, so a single solenoid for an emergency repair ships under the same terms and timeline as a larger stocking order. You are never forced to purchase excess inventory to meet a supplier threshold.
Q: How long does delivery take to my location? A: Express courier runs 3 to 7 days, air freight covers 7 to 12 days, and sea freight spans 25 to 40 days depending on destination. Each option is quoted with a delivery window when you place the order, and tracking is active from dispatch.
Q: My nameplate is worn off — can I still confirm fitment from a photo? A: Yes. A photograph of the pump body, mounting flange, or the old solenoid itself provides enough detail to verify compatibility against your specific Stanadyne or Roosamaster pump build. Send the image and receive a compatibility confirmation within two hours.
Q: What happens if the part arrives and does not fit my machine? A: Contact us immediately with photographs of the received solenoid alongside your pump. If the mismatch resulted from our verification, a replacement ships at no additional charge under the 6-month warranty. Pre-dispatch photo verification is designed to prevent this scenario before the package leaves.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Get your Cummins engine back to full power quickly with this reliable...
Glow Plug 16693SRV for Mitsubishi L3E — 11V, 5.5A, stainless steel body...
12V Alternator 30-00423-00 for Carrier CT2-29TV, CT3-44TV, X2 Series, 120A Output —...
Starter Motor 6670727, 12V 2.2KW 10T — replacement for Bobcat Excavator 325,...
