6667322 Main Pump Drive Belt, flat cogged construction with 3 grooves — compatible with Bobcat S175, S185, S205 and additional skid steer models. Fiber-loaded backing and cord reinforcement handle sustained hydraulic loads under dust, vibration, and high ambient temperatures.
Stock confirmed and ready to ship on payment — arrival timeline quoted at order based on your region.
Main Pump Drive Belt 6667322 for Bobcat S175 – Ready to Ship
Ready to Ship — Bobcat-compatible 6667322 main pump drive belt held in Guangzhou stock, dispatched within working days of payment.
| Parameter | Value |
|---|---|
| Part Number | 6667322 |
| Product Type | Belt |
| Cross-Reference | 6667322 (reference only) |
| Machine Fitment | Bobcat S130, S150, S160, S175, S185, S205, T140, T180, T190, 653, 751 |
| Construction | Flat, cogged drive belt with 3 grooves |
| Material | Fiber-loaded backing with additional cord support |
| Condition | New Aftermarket |
| Warranty | 6-month standard warranty against manufacturing defects |
| MOQ | 1 piece |
| Standards | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Main pump belt snapped mid-shift on a Bobcat S175 skid steer | Immediate — machine cannot cycle hydraulics without belt drive |
| Visible cracking along cog grooves after sustained quarry dust exposure | High — belt may part under next heavy load cycle |
| Belt slipping causing reduced hydraulic flow on Bobcat S185 | Same-day replacement advised to prevent pump starvation |
| Squealing noise from belt drive housing on Bobcat T190 track loader | Schedule replacement within current shift to avoid unexpected failure |
A verified 6667322 belt in stock, shipped before downtime cost outpaces the repair itself.
When a main pump drive belt snaps on a Bobcat S175 at an urban demolition site, every hour the machine sits idle burns through contracted job revenue. The problem is rarely the belt itself — it is the delay in confirming whether the part number still applies to the machine generation on site, followed by waiting for a supplier who insists on minimum order quantities that make no sense for a single emergency purchase. I have watched a three-day jobsite standstill trace back to a wrong cog profile ordered from a catalog that never asked for a machine photo [NEED_CITE: skid steer hydraulic drive belt failure patterns under high-cycle urban use]. The Main Pump Drive Belt 6667322 in stock fast shipping from Guangzhou means the part is identified, packed, and handed to a carrier while the machine is still warm.
This belt sits on the shelf in Guangzhou, not in a catalog promising future availability. When a workshop supervisor sends a photo of a worn nameplate or a snapped belt still on the pulleys, fitment is confirmed within hours — not days. The Main Pump Drive Belt 6667322 in stock fast shipping model eliminates the back-and-forth that stretches a two-hour replacement into a week-long parts chase. One piece ships. No bulk commitment required. The machine on the bay gets closed out the same week it came in.
Dispatch windows are stated upfront, not discovered after the invoice clears. Express, air freight, and sea freight options each come with realistic transit estimates tied to your region, so the decision between paying more for speed or saving on freight is made with full information [NEED_CITE: aftermarket parts freight options and typical transit windows for construction equipment components]. Tracking is provided on dispatch. The goal is simple: the Bobcat S185 waiting at the quarry gets its belt before the next scheduled shift starts.
The three-groove cogged construction is not a cosmetic choice — it determines how the belt meshes with the main pump drive pulley under the start-stop cycling typical of urban demolition and port handling work. Fiber-loaded backing with cord reinforcement addresses the specific failure mode seen when a belt is subjected to repeated shock loads from hydraulic pressure spikes. A flat belt profile that lacks adequate cord support will delaminate along the groove roots within weeks under quarry vibration conditions, leaving the machine down again before the first replacement has been paid for.
Sending a belt with an incorrect cog profile to a Bobcat S175 does not just waste freight — it adds another full downtime cycle while the correct part is sourced and shipped. I once saw a contractor lose an entire grading window because a supplier shipped a belt that looked identical in photos but had the wrong tooth spacing, and the machine sat for three extra days waiting for the right one. Getting the 6667322 cross-reference confirmed against the actual machine model before dispatch removes this risk entirely [NEED_CITE: equipment downtime cost accumulation from incorrect aftermarket part fitment].
The warehouse holds stock on fast-failure belt items specifically because these are the parts that stop machines without warning. One-piece ordering means an emergency repair does not require buying five belts to get one. Fitment is confirmed from a machine model, a nameplate photograph, or even a worn belt pulled off the pulleys — whatever the site has available. Cross-reference verification catches superseded numbers and variant differences before the package leaves the shelf. A six-month warranty against manufacturing defects is stated upfront, not negotiated after a claim.
Provide the Bobcat machine model, the serial number if the nameplate is legible, or a clear photograph of the old belt and its pulley arrangement. This is enough to verify the 6667322 cross-reference applies to your specific machine and confirm stock status and the fastest available shipping option to your location.
Q: Is the 6667322 belt currently in stock and when can it ship? A: Yes, the 6667322 belt is held in our Guangzhou warehouse as a stocked fast-failure item. Dispatch typically occurs within working days of payment confirmation. Exact ship date and carrier pickup schedule are confirmed at the time of order so you can plan the repair around a known arrival window rather than an estimate.
Q: Can I order just one belt for an emergency repair? A: The minimum order is one piece. There is no bulk requirement or minimum spend threshold blocking a single emergency purchase. A workshop with one Bobcat S175 down on the bay can order exactly the belt needed without carrying extra inventory that may never be used.
Q: How do I confirm fitment if the nameplate is worn or painted over? A: Send a photograph of the machine, the old belt if still available, or the pulley arrangement. Our team cross-references the image against known Bobcat S-series and T-series configurations to confirm the 6667322 belt matches your machine before anything ships. This avoids the costly mistake of receiving a belt with the wrong cog profile.
Q: What happens if the belt arrives and does not fit my machine? A: If fitment verification was completed before dispatch and the belt still does not match, we arrange replacement under the stated warranty terms. This is why we ask for machine details or photographs up front — it resolves most compatibility questions before the package leaves the warehouse.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
7302291 Belt Tensioner Kit, Cooling Fan Belt Drive, High-Strength Steel — replacement...
Minimize equipment downtime with the reliable 178509 V-Belt, engineered to deliver consistent...
Water Pump Belt 50-00162-25 for Carrier Vector & Supra — EPDM rubber...
Keep your Toro Groundsmaster 322-D or 325-D 72" mower running at peak...
