Water Pump ED0065845680-S | Fast Dispatch for Kohler KDI1903
Water Pump ED0065845680-S for Kohler KDI1903 Series — replacement for ED0065845680-S, fits...
W3SP1580X15 Above Ground Pool Pump, 1.5 HP, UV-Stabilized Polypropylene Housing — compatible with Hayward Power Flo LX single-speed systems.
Dispatch from Stock — W3SP1580X15 above ground pool pump units sit on our Guangzhou warehouse shelf, confirmed available the moment your inquiry lands and shipped within working days, not weeks.
| Parameter | Value |
|---|---|
| Part Number | W3SP1580X15 |
| Product Type | Water Pump |
| Cross-Reference | W3SP1580X15 (reference only) |
| Machine Fitment | Hayward Power Flo LX Single-Speed 1.5 HP Pool Pump |
| Horsepower | 1.5 HP |
| Motor Insulation Class | Class B |
| Max Ambient Operating Temperature | 40°C |
| Impeller Material | Reinforced thermoplastic |
| Shaft Seal Type | Double-lip NBR elastomer with stainless steel springs |
| Shaft Seal Static Pressure Rating | 0.6 bar |
| Mounting Interface Tolerance | ±0.15 mm |
| Housing Material | UV-stabilized polypropylene (ASTM D792) |
| Standards | ISO 9001, ASTM D792 |
| Warranty | 3–12 months against manufacturing defects |
| Failure Symptom | Replacement Urgency |
|---|---|
| Pump motor hums but impeller does not turn, water circulation stops completely | Immediate — pool water quality degrades within hours without circulation |
| Visible cracking or UV damage on pump housing near discharge port | High — housing failure leads to flooding and electrical hazard |
| Shaft seal leak producing steady drip at motor-to-wet-end junction | Same-day — water ingress destroys motor bearings and insulation |
| Intermittent priming loss requiring manual restart multiple times daily | Scheduled replacement before peak swim season |
| Seasonal startup reveals seized impeller after winter storage | Urgent — facility opening deadline at risk |
A shut-down pool pump means shut-down operations until a replacement is physically on site and bolted in.
Facility managers and pool service contractors know the drill: the pump quits on a Friday afternoon, the local supplier has nothing on the shelf, and the backorder estimate stretches into the following week. Every day without circulation risks health code violations, guest complaints, and chemical imbalance damage to pool surfaces [NEED_CITE: commercial pool water circulation standards and health inspection requirements]. The W3SP1580X15 above ground pool pump in stock fast shipping replacement is not a luxury — it is the single component standing between a functioning facility and a boarded-up pool deck. Waiting for confirmation emails while the water turns green is a cost no operator budgets for.
The first step when a pool pump fails is often staring at a faded or painted-over nameplate, trying to read a part number that may have been superseded two or three generations ago. We confirm fitment from whatever you have — a readable part number, a machine model like Hayward Power Flo LX, or a clear photograph of the existing pump and its mounting plate. Our team responds with stock confirmation and the correct W3SP1580X15 above ground pool pump cross-reference within hours, not days. You get a definitive yes or no before committing to an order, eliminating the guesswork that leads to receiving the wrong unit.
Stock availability means the pump leaves our Guangzhou warehouse within 2–5 working days of order confirmation. From there, express courier, air freight, and sea freight options each carry different transit windows, and we quote the estimated arrival date at the time of order — not after payment clears [NEED_CITE: international freight transit time variables for mechanical components]. The UV-stabilized polypropylene housing and reinforced thermoplastic impeller ship in protective packaging designed for courier handling, so the unit arrives ready to mount without transit damage surprises. Real-time tracking numbers go out the moment the parcel is scanned by the carrier.
The 1.5 HP rating matches the original Hayward Power Flo LX motor output, ensuring the replacement handles the same flow volume your existing plumbing was designed around. The Class B motor insulation rated for up to 40°C ambient operation covers the hot mechanical rooms and outdoor pump enclosures typical of commercial pool installations. The double-lip NBR shaft seal with stainless steel springs addresses the most common failure point on single-speed pool pumps — seal wear from continuous duty and chemical exposure — maintaining a 0.6 bar static pressure rating that prevents water from reaching motor bearings. The ±0.15 mm mounting interface tolerance means bolt holes align with the existing base without drilling or adapter plates.
Ordering a pump that looks right but has a different bolt pattern, shaft length, or discharge orientation means the pool stays dead while you wait for a return, a re-ship, and a second round of freight charges [NEED_CITE: aftermarket pool pump fitment verification procedures]. A housing material that lacks UV stabilization may survive one season in an outdoor enclosure before developing stress cracks near the port connections. A single-lip shaft seal on a pump that runs continuous commercial duty can allow water past the seal face within months, destroying the motor and turning a pump swap into a full motor and wet-end rebuild. These are not theoretical risks — they show up on job sites where the cheapest available unit was installed without checking material or seal specifications against the operating environment.
We carry the W3SP1580X15 above ground pool pump in our own warehouse, not in a distant third-party distribution network, so stock status is verified on the shelf before we confirm your order. A single-unit minimum means an emergency replacement ships without forcing you to buy inventory you do not need. Our technical team confirms compatibility from part numbers, equipment models, or nameplate photographs — whichever identifier you have on hand. Both our self-produced and qualified sourced supply lines operate under identical quality control and warranty terms, giving you consistent accountability regardless of which production batch fulfills your order. Cross-reference verification covers superseded numbers and alternate references that other listings may carry forward with errors.
If the nameplate is readable, send the part number. If it is faded or painted over, photograph the full pump including the mounting flange, discharge port orientation, and any visible casting marks on the housing. We will confirm whether the W3SP1580X15 above ground pool pump matches your existing installation, quote the dispatch timeline, and provide an estimated arrival date for your location — all before you place an order.
Q: Is the W3SP1580X15 pool pump in stock and when can it ship? A: Stock is confirmed from our Guangzhou warehouse shelf before we accept your order, not estimated from a supplier catalog. The pump dispatches within 2–5 working days of order confirmation, with express, air, and sea freight options quoted alongside estimated arrival dates for your destination at the time of inquiry.
Q: Can I order just one unit for an emergency pool repair? A: Yes. The minimum order is one piece, with no bulk requirement attached. This matters when a single facility pump has failed and you need a replacement on the next available flight, not a container load of inventory you have no space or budget to store.
Q: My pump nameplate is faded beyond reading — can you confirm fitment from a photo? A: Send clear photographs of the pump housing, mounting flange, discharge port position, and any visible casting marks. Our team cross-references these visual details against known Hayward Power Flo LX configurations and responds with a fitment confirmation or a request for one additional angle if needed.
Q: What happens if the pump arrives and does not match my installation? A: Notify us immediately with photographs of the received unit alongside your existing pump mounting pattern and port orientation. We verify the discrepancy against our dispatch records and arrange the correct replacement. Pre-order photograph verification significantly reduces this risk.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Water Pump ED0065845680-S for Kohler KDI1903 Series — replacement for ED0065845680-S, fits...
W3SP1580X15 Pool Pump, 1.5 HP Single-Speed — replacement for Hayward Power Flo...
Keep your Kubota D902/D1105 engine and Bobcat 743/753 skid steer loader running...
1273085C91 Water Pump with Gasket — aftermarket replacement for CASE IH tractors...