12V 9T Starter Motor 19269-63013 for Kubota Engine D902 D950 D722E Excavator KX41-3 KH61 KX71-3 Tractor BX24 BX25 BX2350D BX2230D
Get your Kubota D902 or KX41-3 back to work quickly with this...
6678205 Alternator 12V 90A — replacement for Bobcat T140, T180, T190 and compatible track loaders. Cross-reference interchange: 6675292, 6681857, 6690593.
In-Stock Fast Dispatch — Guangzhou warehouse holds this 12V 90A alternator ready for immediate release, so your Bobcat track loader does not sit idle waiting for a part.
| Parameter | Value |
|---|---|
| Part Number | 6678205 |
| Product Type | Alternator |
| Cross-Reference | 6675292, 6678205, 6681857, 6690593, 7008772, 6881249, LRA03022, 66785292, 428402, 600934, A12390N, TA000A63701, 2200-0501, 22000501 (reference only) |
| Machine Fitment | Bobcat T110, T140, T180, T190, T200, T2250, T250, T300, T320, T550, T590, T630, T650, T750, T770, T870, V417 |
| Voltage | 12V |
| Amperage | 90A |
| Condition | New Aftermarket |
| Warranty | 3-12 months |
| Quality Standard | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Battery not charging during operation | Immediate — machine cannot sustain electrical loads |
| Dashboard warning light illuminated, voltage dropping below threshold | Same-shift replacement to avoid full electrical failure |
| Intermittent charging with flickering lights on T140 or T180 | Scheduled within the week before complete alternator seizure |
| Total alternator failure on job site mid-shift | Emergency dispatch required to resume work |
| Hydraulic controls losing responsiveness due to low voltage | Priority replacement — electrical fault cascades into hydraulic system errors |
When a Bobcat track loader stops charging on site, every hour of downtime compounds into missed deadlines and idle crew costs.
I have watched a T140 sit motionless on a landscaping job for nearly a week because the site supervisor could not read the alternator nameplate — paint and grime had completely obscured the part number, and the procurement team spent days cross-referencing manuals before placing an order. By then, the project schedule had already slipped. That same machine could have been back at work within days if someone had simply sent a photograph of the nameplate and the machine model to a supplier who keeps the 12V 90A alternator 6678205 in stock fast shipping replacement for Bobcat track loaders [NEED_CITE: electrical system diagnostic procedures for compact track loaders].
The pattern repeats across contractors and repair shops. A T190 comes into the workshop with a dead battery, the technician pulls the alternator, finds the label worn off, and now the shop is waiting on multiple suppliers to confirm whether 6678205 or one of its cross-reference numbers is the right call. Meanwhile the customer is calling every morning asking when their machine will be ready.
This 12V 90A alternator 6678205 in stock fast shipping replacement for Bobcat loaders ships from our Guangzhou warehouse, where common high-failure items like charging system components are held in ready-to-dispatch inventory. You do not need to know the exact part number to start the process — sending us a photograph of the machine nameplate or the old alternator label is enough for our team to confirm compatibility and quote a dispatch timeline on the same working day.
Express courier options through DHL, FedEx, and UPS deliver to most international destinations within a typical three-to-seven working day window from the moment the 12V 90A alternator 6678205 in stock fast shipping replacement for Bobcat leaves Guangzhou [NEED_CITE: international express freight transit standards for machinery components]. We provide tracking details at dispatch and confirm estimated arrival so you can plan the repair schedule around a known delivery window rather than guessing. The minimum order is one piece, meaning a single emergency alternator ships without waiting to accumulate a larger batch.
The 12V output matches the standard electrical architecture across the Bobcat T-series track loader range, and the 90A rating provides sufficient charging capacity to sustain the machine's full electrical load — hydraulic solenoids, instrument panel, work lights, and ECU — even under continuous operation. A lower amperage unit would struggle to maintain system voltage during heavy hydraulic cycling, leading to intermittent fault codes on the controller. The ISO 9001 manufacturing standard ensures the winding tolerances and diode bridge specifications meet consistent output requirements across production batches.
Ordering the wrong alternator because of an unverified cross-reference number means the machine stays down through a second shipping cycle — another week or more of lost productivity while the correct unit is sourced and delivered [NEED_CITE: machinery downtime cost factors in construction and landscaping operations]. On a grading project with a penalty clause for late completion, that delay can exceed the part cost by a wide margin. Even when a near-match unit physically bolts on, mismatched pulley alignment or incorrect connector pin count leads to belt wear or intermittent connection faults that surface weeks later as unexplained electrical failures.
Our Guangzhou warehouse stocks this alternator for immediate release, eliminating the typical multi-week lead time associated with made-to-order sourcing. Orders of a single unit are accepted without surcharge, supporting emergency repairs where the machine is already down. Part identification is confirmed from a part number, machine model, or photograph of the worn nameplate — whichever reference point you have available. Cross-reference verification covers the full list of superseded and alternate numbers including 6675292, 6681857, and 6690593, all marked for identification purposes, so you receive confirmation before the unit ships rather than discovering a mismatch at the workshop bench. A technical team is available to verify compatibility against your specific machine serial range.
Send the part number you have, the Bobcat machine model, or a photograph of the old alternator and its nameplate — whichever reference is available. We will confirm stock availability, verify compatibility against your specific track loader serial range, and provide a dispatch timeline so you can plan the repair around a known arrival window.
Q: Is this alternator in stock and ready to ship right now? A: This 12V 90A alternator is held in our Guangzhou warehouse as a common stock item for Bobcat T-series track loaders. Stock status and estimated dispatch date are confirmed at the time of your inquiry so you receive an accurate timeline rather than a general estimate.
Q: What is the minimum order quantity for an urgent single-unit repair? A: The minimum order is one piece. You do not need to bundle multiple units or wait for a batch to reach a threshold before your emergency alternator ships from our warehouse.
Q: How fast can I expect delivery at my location? A: Express courier services typically deliver within three to seven working days from Guangzhou dispatch, depending on destination. We quote the expected arrival window when confirming your order so you can schedule the repair accordingly.
Q: The nameplate on my Bobcat is worn and unreadable — how do I confirm the correct alternator? A: Send a photograph of the old alternator or the machine nameplate along with the model designation. Our team cross-references the visual details against known fitment data for T140, T180, T190, and other compatible models to verify the correct unit before shipping.
Q: What happens if the alternator arrives and does not fit the machine? A: We verify compatibility before dispatch using your machine model, existing part number, or photographic reference. If a fitment discrepancy arises despite this verification, our team works with you to identify the correct unit and arrange a resolution under our warranty terms.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Get your Kubota D902 or KX41-3 back to work quickly with this...
Cushion Damper 358172 / 4700358172, Rubber Vibration Mount for Dynapac CA Series...
Spark Plug Wire 3966404, replacement for Cummins B5.9 / ISB5.9G gas engines...
Glow Plug 16851-65510 aftermarket replacement for Kubota D640 D722 engines, 0.9–1.1 Ω...