Rubber Shock Mount Compatible with Stanley HS6000, Rubber Material — replacement for compact vibratory plate compactors including HS6019, HS6100, HSX6, and HS8000 series.
Dispatch readiness confirmed at time of quote with real-time stock check.
Ready Stock — Guangzhou warehouse holds rubber shock mounts for Stanley HS6000 and HS11000 compactors, confirming availability before you commit to an order.
| Parameter | Value |
|---|---|
| Product Type | Cushion Damper |
| Cross-Reference | TRSA000008038, SW-180100, SW180100 (reference only) |
| Machine Fitment | HS6000, HS6019, HS6100, HSX6, HS8000, HS11000, HSX11, PCF64 |
| Brand Compatibility | Stanley, Bobcat, Doosan |
| Material | Rubber |
| Type | Shock Mount |
| Condition | New Aftermarket |
| Warranty | 3-12 months against manufacturing defects |
| MOQ | 1 piece |
| Standard | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Excessive vibration transferring to the operator handle | Immediate — operator safety and fatigue risk |
| Visible cracking or tearing on the rubber body | High — complete separation can halt the job |
| Engine or exciter unit sitting loose on the frame | Immediate — secondary damage to mounting bolts |
| Unusual rattling noise during compaction cycles | Same-day diagnosis, replace before next shift |
| Uneven compaction results on paved surfaces | Scheduled replacement within current work week |
A verified Rubber Shock Mount Replacement in Stock ships within days, not weeks, so your plate compactor returns to the jobsite before concrete curing windows close.
Late-night calls from road repair crews often start the same way: the Stanley HS6000 is sitting on a freshly prepped sub-base, the operator noticed the handle shaking violently, and a torn isolator is the culprit. Waiting on minimum order quantities from suppliers who only deal in bulk means the machine stays down while the project clock keeps running. We have seen contractors lose entire pours because a single cushion damper could not be sourced in time [NEED_CITE: impact of single-component delays on concrete placement schedules].
Our Guangzhou warehouse maintains Rubber Shock Mount Replacement in Stock for the HS6000 series through to the HS11000 and HSX11 models. When a nameplate is worn from jobsite abuse or painted over during machine refurbishment, a clear photograph of the old mount — showing bolt hole spacing and overall profile — is enough for our team to cross-check against the TRSA000008038 and SW-180100 interchange references. This confirmation happens before you place an order, not after.
Once the correct cushion damper is identified, we quote express, air, or sea freight options with arrival timing based on your destination. A single shock mount for an urgent HS8000 repair typically travels by express courier, arriving within days rather than the multi-week lead times common with bulk-only suppliers. Real-time stock confirmation means the timeline we quote at inquiry is the timeline we commit to [NEED_CITE: freight transit expectations for construction equipment spare parts].
The rubber compound in this shock mount is formulated to absorb the high-frequency vibrations generated by small vibratory plate compactors. A mount that is too hard transmits vibration directly into the operator handle and engine frame, accelerating fatigue on both the operator and the machine's bolted joints. A mount that is too soft allows the exciter assembly to shift under load, risking misalignment. The ISO 9001 production standard ensures each batch meets the specified durometer range for these Stanley and Bobcat compactor models.
Ordering a shock mount without verifying the exact variant for your HS6019 or PCF64 model can result in a part that physically bolts on but fails within weeks. Slight differences in rubber density or mounting hole diameter across compactor generations mean a close-but-wrong isolator creates a new vibration problem rather than solving the original one. The machine goes back down, the courier runs again, and the repair cost doubles before the week is out [NEED_CITE: cost compounding from incorrect aftermarket part fitment].
Our own production lines and qualified sourced supply carry the same QC and warranty terms, so whether your HSX6 mount comes from our facility or a certified partner, the 3-12 month warranty applies identically. Eight equipment categories under one account means if you also need compactor seals, engine filters, or undercarriage pins, everything consolidates into a single dispatch. One-piece minimum order means an emergency HS11000 repair is never blocked by quantity thresholds. Identification from a machine model, part number, or photograph cuts through the uncertainty when jobsite conditions have destroyed the nameplate.
Send us the machine model — whether it is an HS6000, HSX11, or PCF64 — along with a photograph of the failed mount if the part number is illegible. We will confirm stock status, verify compatibility against our cross-reference records, and return a freight quote with expected arrival timing so you can decide and move forward the same day.
Q: Are these rubber shock mounts in stock now? A: Our Guangzhou warehouse holds Rubber Shock Mount Replacement in Stock for Stanley HS6000, HS8000, HS11000, and related compactor models. We confirm real-time availability at the point of inquiry, so you know whether your specific mount is ready to dispatch before committing to an order.
Q: What is the minimum order quantity for an urgent repair? A: One piece. We do not impose bulk minimums that block a single emergency replacement. Whether your HS6019 needs one cushion damper or your rental fleet needs several, the order moves forward at whatever quantity your repair demands.
Q: How fast can the shock mount arrive at my location? A: For urgent single-piece orders, express courier delivery typically arrives within days depending on destination. We quote the expected arrival window at the inquiry stage based on your address and chosen shipping method, so there are no surprises after you place the order.
Q: How do I confirm the right mount when the nameplate is gone? A: Send a clear photograph of the old shock mount showing its profile and bolt hole pattern, along with the machine model. Our team cross-checks against fitment records for HS6000 through HSX11 and PCF64 models to confirm the correct part before shipping.
Q: What happens if the wrong part arrives? A: Our pre-shipment verification process — matching your machine model and photographs against our cross-reference records — is designed to prevent this. If an error on our side results in an incorrect cushion damper, we arrange replacement dispatch under our warranty terms.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Keep your Cummins B5.9 or ISB5.9G engine running at peak performance with...
SILZKR7C11S 92932 Iridium Spark Plug, 0.6mm Center Electrode — replacement for Honda...
Recoil Starter 150-481, replacement for Briggs & Stratton 15.5HP-17.5HP engines — ready...
Starter Motor 6676957 6685190, 12V 2.7kW — compatible with Kubota V2203, V3300...
