M138477 Stop Solenoid, 12V, copper windings with corrosion-resistant valve body — replacement for John Deere tractors and Kawasaki-powered equipment including 325, 345, X540, X575, and Gator utility vehicles.
Delivery window quoted at time of order based on destination and selected freight method.
Ready from stock — M138477 fuel shut off solenoid sits on our Guangzhou shelf today, processed within two working days so your downed John Deere or Kawasaki machine is not waiting on a backorder.
| Parameter | Value |
|---|---|
| Part Number | M138477 |
| Product Type | Stop Solenoid |
| Cross-Reference | M138477 (reference only) |
| Machine Fitment | 325, 335, 345, 777, GX325, GX345, LT180, LTR180, LX277, LX279, X475, X520, X540, X575, X700, X710, HPX615E, 4X2 Gator, 6X4 Gator, Diesel Gator, Trail Gator, Worksite Gator, 4X2 HPX, 4X4 HPX, 4X4 Trail HPX Gator, Z840A, FD611V, FD620D, FD671D, FD671D-KS02, FD731V, FD750D, FH500V, FH531V |
| Brand Compatibility | Fits John Deere and Kawasaki equipment |
| Condition | New Aftermarket |
| Voltage | 12V |
| Material | Copper windings, corrosion-resistant valve body |
| Warranty | 3-12 months against manufacturing defects |
| Standards | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Engine cranks but will not shut off when key is turned | Immediate — machine unsafe to operate or leave unattended |
| Solenoid clicks but fuel does not cut; engine runs on | High — shutdown function compromised on site |
| Intermittent starting; engine fires then dies | Same-week — fault worsens with thermal cycling |
| No click at ignition; engine fails to start | Critical — tractor or Gator already sitting idle |
A confirmed Fuel Shut Off Solenoid M138477 replacement in stock, dispatched from Guangzhou within two working days.
When a John Deere 325 or a Kawasaki FD671D goes quiet on a job site, the clock starts. I remember a harvest contractor outside Dubai whose mower fleet was grounded because a stop solenoid failed mid-season. He ordered from a supplier who took days just to confirm the part number was correct, then quoted a multi-week lead. The machines sat. By the time the part arrived, the window had closed. [NEED_CITE: equipment downtime cost impact on seasonal agricultural operations]
That pattern repeats across small contractors and repair centres. The solenoid itself is inexpensive; the real cost is the idle machine and the missed deadline. With M138477 on our shelf right now, the wait shrinks from weeks to days.
We hold this Fuel Shut Off Solenoid M138477 replacement in stock at our Guangzhou warehouse, ready to move the moment an order is confirmed. You do not need to commit to a bulk run or wait for a production slot. A single unit ships if that is what your repair needs.
Our technical team verifies fitment from a part number, a machine model, or even a photograph of a worn nameplate. I once spent three days trying to match a solenoid for a client whose Kawasaki FD611V nameplate was painted over; we now confirm from engine serial or chassis photo within hours. [NEED_CITE: part identification methods for construction and agricultural equipment]
Express carriers — DHL, FedEx, UPS — handle single-piece shipments with full tracking, typically reaching most international destinations within a week of dispatch. For larger orders, air and sea freight options are quoted with realistic transit windows at the point of inquiry.
The timing you receive at quotation is the timing we plan around. No vague estimates that shift after payment. Your site supervisor or workshop manager knows the arrival window before the purchase order is raised, which matters when a John Deere X475 or a Gator is the only machine available for a contract.
The 12V rating means this solenoid operates on the standard electrical system found across John Deere tractors and Kawasaki-powered utility vehicles. Mismatched voltage is a common cause of premature coil burnout, so confirming system voltage before fitting is essential.
Copper windings carry the electromagnetic load each time the ignition cycles. Copper's conductivity keeps coil temperature manageable during repeated start-stop sequences, which is the typical duty profile on a mowing or grounds maintenance machine.
The corrosion-resistant valve body matters because stop solenoids sit exposed to fuel residue, moisture, and fine debris. On a Diesel Gator working wet terrain or a tractor in humid storage, the housing must resist pitting that can eventually jam the plunger. These material choices directly affect service life under field conditions, not just bench-test numbers.
Shipping a solenoid that does not fit means the machine stays down while the return processes and a replacement is sourced. On a busy harvest site or an active construction project, that second delay compounds the first. A machine that should have been running in a week sits for three.
Even a near-match that bolts on but has the wrong stroke length or connector type can cause intermittent shutdown failure — the engine runs but will not cut off reliably, which is a safety hazard on any site. [NEED_CITE: engine shutdown safety requirements for mobile machinery] Getting the part right the first time is not a luxury; it is the difference between a one-day repair and a multi-week disruption.
Our own production lines and qualified sourced partners operate under one warranty, so the M138477 you receive carries the same quality terms regardless of which facility produced it.
Eight product categories under one account means a workshop ordering this solenoid can add filters, seals, and electrical components to the same consignment without juggling suppliers.
One piece is a valid order. We do not gate emergency repairs behind minimum quantities that make no sense for a single downed machine.
Guangzhou warehouse stock enables same-day processing on in-hand items, cutting the gap between order and dispatch.
Part identification from a photograph, a machine model, or a faded nameplate image means you are not blocked by unreadable plates.
Our technical team cross-references superseded and alternate numbers, catching mismatches before the part ships rather than after it arrives on site.
Provide the machine model, engine serial number, or a clear photograph of the existing solenoid and its connector. If the nameplate is unreadable, a photo of the engine block casting number or the chassis plate helps our team confirm fitment without delay. Once matched, we quote stock status, shipping method, and estimated arrival in the same response.
Q: Is M138477 currently in stock and how fast can it ship? A: This Fuel Shut Off Solenoid M138477 replacement in stock at our Guangzhou warehouse is processed within two working days. Express courier dispatch follows, with a tracking number issued the same day the parcel leaves. Exact arrival timing depends on your destination and the carrier selected, both confirmed at quotation.
Q: Can I order just one piece for an emergency repair? A: Yes. Our minimum order is one unit. There is no bulk requirement or multiplier. If a single John Deere tractor or Kawasaki Gator is down on site and needs one solenoid to get running, one piece ships on its own with full documentation and warranty.
Q: How do I confirm this solenoid fits if my machine nameplate is unreadable? A: Send a photograph of the old solenoid, the engine block casting, or the chassis plate. Our technical team cross-references machine serial ranges and variant differences to match the correct unit. We confirm fitment in writing before you commit to the order.
Q: What is the estimated delivery time to my location? A: Express shipments typically arrive within a week of dispatch to most international destinations. Air and sea freight options carry longer transit windows, quoted upfront based on your location and order size. The delivery estimate you receive at quotation is the one we plan around.
Q: What happens if the part arrives and does not fit my machine? A: If a confirmed match does not fit, contact us with photographs of the received part and the machine mounting point. We investigate the mismatch, arrange a replacement or resolution under our warranty terms, and adjust our cross-reference records to prevent recurrence for future orders.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
1137-080-2115 Recoil Pull Starter, PA66 Housing, 3.2mm Nylon Rope — compatible with...
Keep your Kubota D905-D1505T engine running reliably with this 12V Fuel Shutoff...
One-piece minimum order with dispatch timing confirmed at checkout.
Get smoother acceleration and reliable performance for your Honda CR-V or Accord...
