Cummins-Compatible V-Belt 3288497 β Fast Dispatch
V-Belt 3288497 for Cummins ISB, QSB, 6CTA, ISC, QSC Engines β compatible...
Drive Belt 105245801 / 10G3758 (cross-reference), chloroprene rubber with aramid cord β replacement for Club Car Precedent, Carryall 300/500/550/700/900 Turf, Onward and Cafe Express models. Guangzhou warehouse stocked for immediate dispatch, one-piece minimum with no MOQ barrier. Send a part number, machine model or nameplate photo and our team confirms fitment within two hours. Express, air and sea freight options quoted with arrival timing upfront.
Ready to Ship β Guangzhou warehouse holds Drive Belt 105245801 stock so your Club Car Carryall or Precedent never waits weeks for a simple belt change.
| Parameter | Value |
|---|---|
| Part Number | 105245801 |
| Product Type | Drive Belt |
| Cross-Reference | 10G3758 (for identification purposes) |
| Machine Fitment | Onward, Carryall 300 Turf, Carryall 500 Turf, Carryall 550 Turf, Carryall 700 Turf, Carryall 900, Cafe Express, Precedent |
| Brand Compatibility | Fits Club Car models listed above |
| Tensile Reinforcement | High-tensile aramid cord |
| Rubber Compound | Chloroprene rubber |
| Operating Temperature Range | β20Β°C to +80Β°C |
| Dimensional Tolerance | Β±0.3 mm |
| Condition | New Aftermarket |
| Warranty | 6 months against manufacturing defects |
| Standards | ISO 9001, SAE J1903 |
| Packaging | Original retail box with protective inner sleeve |
| Failure Symptom | Replacement Urgency |
|---|---|
| Belt slipping under load on Carryall utility vehicle | Immediate β cargo operations halted until tension restored |
| Visible cracking or fraying on Precedent drive belt | Same-day replacement to avoid strand-on-course scenario |
| Squealing noise during acceleration on Cafe Express | Schedule within one shift before belt snaps mid-route |
| Glazed belt surface on Carryall 700 Turf | Urgent β slipping accelerates clutch and sheave wear |
| Belt broke during groundskeeping route on municipal fleet | Emergency β route coverage gap until replacement arrives |
A readable photo of the old belt or the vehicle data plate is enough to confirm the correct Drive Belt 105245801 replacement in stock fast shipping.
I once received a blurry photo from a mining camp supervisor at two in the morning. The belt had snapped, the nameplate was painted over, and the only thing visible was a partial number on the belt backing. We matched it against the Carryall 500 Turf application chart and had a replacement on a courier flight before sunrise. The alternative β guessing, ordering wrong, waiting again β would have cost that site three idle days [NEED_CITE: field belt failure impact on utility vehicle uptime in remote sites]. Every hour a Carryall sits still is an hour your crew walks or improvises with equipment not built for the job. That is why confirming the right Drive Belt 105245801 replacement in stock fast shipping matters more than any spec sheet.
Stock availability is checked in real time against our Guangzhou warehouse system. When you send a part number, a machine model, or a photograph of the worn belt, our technical team cross-references it against the fitment list within two hours. This Drive Belt 105245801 replacement in stock fast shipping process eliminates the back-and-forth that delays urgent orders. You get a confirmed match and a dispatch timeline in one reply, not three emails later.
Once the Drive Belt 105245801 is confirmed and packed, courier services such as DHL, FedEx, or UPS typically deliver within three to seven business days to most international destinations. Air freight covers seven to twelve days for larger consolidated shipments, while ocean freight spans twenty-five to forty days for non-urgent restocking [NEED_CITE: international courier transit times for lightweight automotive parts]. The retail box with its protective inner sleeve is designed to survive courier handling without additional repackaging. Tracking numbers are issued the same day the parcel leaves our dock, so your workshop supervisor knows exactly when to schedule the belt change.
Chloroprene rubber was chosen for this belt because it resists oil mist, ozone, and the heat buildup that occurs inside a continuously variable transmission enclosure. The high-tensile aramid cord reinforcement prevents the belt from stretching under the sudden load spikes that utility vehicles experience when climbing loaded grades. A dimensional tolerance of Β±0.3 mm ensures the belt tracks correctly on the sheave without riding the edges β a common cause of premature fraying on wider belts. The β20Β°C to +80Β°C operating window covers everything from cold-start mornings at elevation to afternoon heat soak in tropical groundskeeping fleets. SAE J1903 compliance means the belt has been tested for tensile strength and elongation under controlled laboratory conditions [NEED_CITE: SAE J1903 belt testing requirements for utility vehicles].
Sending out the wrong belt means the vehicle stays down while the return ships back and the correct one flies out. For a municipal groundskeeping fleet running tight seasonal routes, that gap translates into uncut turf, missed contract milestones, and penalty conversations with the city procurement office. Even when a wrong belt physically fits the sheave, incorrect tension or compound can cause early glazing, which then damages the drive clutch surface β turning a simple belt swap into a sheave and clutch rebuild [NEED_CITE: secondary damage from incorrect CVT belt specification]. The cost is never just the belt.
Our Guangzhou warehouse stocks the Drive Belt 105245801 alongside other Club Car-compatible belts, so a fleet order covering several vehicle models ships as one parcel. One piece is a valid order β there is no minimum quantity gate blocking an emergency single-belt purchase. Part identification works from a number, a machine model, a VIN, or a photograph when the label is gone. Cross-reference verification covers superseded numbers, including the 10G3758 interchange reference. A six-month warranty covers manufacturing defects, with free replacement if a dimensional or material issue surfaces during that window.
Send the clearest photo you can manage β the belt backing, the data plate, or the sheave assembly. If the old belt is still on the vehicle, measure its outside circumference and top width and include those numbers. For Precedent models, note whether the vehicle is a gas or electric variant, as the belt routing path differs. Once we confirm the match against Drive Belt 105245801, you will receive a dispatch date and estimated arrival window in the same reply.
Q: Is Drive Belt 105245801 in stock right now and how quickly can it ship? A: This belt is held in our Guangzhou warehouse as ready stock. Once your fitment is confirmed, the parcel is typically handed to the courier within two working days. Tracking is issued the same day it leaves, so you can plan the installation slot around the confirmed arrival date.
Q: Can I order just one belt or is there a minimum quantity? A: One piece is a valid order. There is no minimum quantity requirement, which matters when a single Carryall or Precedent is down and you need exactly one Drive Belt 105245801 replacement in stock fast shipping to get it running again.
Q: The nameplate on my vehicle is unreadable β how do I confirm this is the right belt? A: Send a photo of the old belt, the sheave assembly, or any remaining label fragment. Our team cross-references your image against the Carryall and Precedent fitment list, including the 10G3758 interchange reference, and confirms the match before anything ships.
Q: How long does courier delivery take to North America or the Middle East? A: Express courier services typically deliver within three to seven business days to both regions. The exact window depends on your specific city and local customs processing. Tracking details are provided at dispatch so you can monitor progress in real time.
Q: What happens if the belt arrives and does not fit or shows a defect? A: Contact us immediately with photos of the received belt and your vehicle data plate. If the belt is confirmed incorrect or defective under the six-month warranty, a replacement is dispatched at no additional cost. We handle the return logistics so your team can focus on getting the vehicle operational.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
V-Belt 3288497 for Cummins ISB, QSB, 6CTA, ISC, QSC Engines β compatible...
Ready for immediate dispatch β stock status and outbound timing confirmed at...
Drive Belt 40022-91 Replacement for Sportster 883/1200, Aramid-Reinforced Rubber β compatible with...
Keep your CASE 650K, 750K, CX130, or CX210 running at peak performance...