26607-26602-71 Accelerator Rod, high-tensile carbon steel, zinc-nickel plated β replacement for Toyota forklifts 8FD40N, 8FG25, 8FG30, and 120+ models with 1DZ, 4Y, 1ZS, or 3Z engines.
One-piece MOQ honored on every order β urgent replacements ship without delay or bundled commitments.
Single-Piece Dispatch β Guangzhou warehouse holds this accelerator rod ready for same-day packing, so your forklift is not waiting on a back-ordered component.
| Parameter | Value |
|---|---|
| Part Number | 26607-26602-71 |
| Product Type | Accelerator Rod |
| Cross-Reference | 26607-26602-71 (for identification purposes), 266072660271 (for identification purposes) |
| Machine Fitment | 8FD40N, 8FD50N, 8FG25, 8FG30, 8FDU15β8FDU32, 8FGU15β8FGU32, 8FGCU20β8FGCU32, FDZN20βFDZN30, FGZN20βFGZN30, 02-8FDF15 to 02-8FDF30, 02-8FGF15 to 02-8FGF30, 30-8FG10 to 30-8FG30, 32-8FG10 to 32-8FG30, 40-8FD35N to 40-8FD80N, 50-5FD60 to 5FG70, 60-8FD10 to 60-8FDN30, 62-8FD10 to 62-8FDN30, 70-8FD20 to 70-8FDN30, 72-8FD20 to 72-8FDN30, 82-8FD20 to 82-8FDJ35, 8FBCHU25, 8FBCU20β8FBCU32, 8FG18B, 8FG25B, 8FG30B |
| Engine Compatibility | Toyota 1DZ, 1KD, 14Z, 4Y, 1FZ, 3Z, 1ZS, 1FS, 2Z, N04C |
| Condition | New Aftermarket |
| Material | High-tensile carbon steel |
| Surface Treatment | Zinc-nickel plating |
| Warranty | 3β12 months against manufacturing defects |
| MOQ | 1 piece |
| Standards | ISO 9001, ISO 8532 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Throttle response becomes sluggish or inconsistent during loaded travel | Immediate β forklift cannot meet shift throughput targets |
| Accelerator pedal feels loose or has excessive dead-band travel | High β operator compensating with over-revving risks drivetrain wear |
| Visible bending or corrosion on the rod linkage between pedal and governor | Scheduled β replace at next service window before complete detachment |
| Engine idle speed fluctuates without pedal input | Immediate β safety risk in warehouse pedestrian zones |
This accelerator rod ships from Guangzhou stock within days, not weeks, restoring throttle control to your Toyota forklift.
When a forklift sits idle because one worn linkage rod is on back-order, the loss compounds across the shift. Workshops often spend several days confirming whether a faded nameplate number is still valid, only to discover the cross-reference table they relied on carries errors forward from the previous seller. An accelerator rod 26607-26602-71 in stock and ready for fast shipping replacement removes that waiting period entirely. The part arrives, the linkage reconnects, and the machine returns to the loading bay [NEED_CITE: aftermarket part availability impact on material handling fleet uptime].
We hold this accelerator rod 26607-26602-71 in stock at our Guangzhou warehouse and confirm real-time availability before you pay. If the original nameplate on your Toyota forklift is worn or painted over, send a photograph of the machine model plate or the old rod itself β our technical team responds with a confirmed match or a corrected cross-reference within hours. This accelerator rod 26607-26602-71 in stock covers fitment across the 8FD40N, 8FG25, and over a hundred additional Toyota forklift models, so a single SKU addresses the majority of mid-range and heavy-duty lift truck throttle linkages.
Once payment clears, the accelerator rod is packed and handed to the courier on the same or next working day. Express carriers typically deliver within several business days to major global ports and inland hubs, while air freight suits consolidated pallets and sea freight handles bulk restocking. Tracking details are provided from warehouse departure through to final delivery. Weekend and holiday inquiries receive a response on the next business morning, so a Friday breakdown does not extend into a second week of downtime.
The high-tensile carbon steel construction gives the rod the rigidity needed to translate pedal movement into precise governor response without flex under repeated cycling. Zinc-nickel plating resists the corrosion that accumulates in cold storage facilities and port terminals where salt air accelerates surface degradation. These material and finish choices mean the accelerator rod maintains its dimensional accuracy across thousands of pedal actuations, keeping throttle response consistent for operators who depend on predictable acceleration in tight warehouse aisles.
Receiving a rod that is slightly too long or too short forces the technician to improvise with spacers or return the part entirely, adding days to a repair that should have taken minutes. A forklift with an incorrectly matched accelerator rod may run but will exhibit poor idle control or fail to reach full governed speed, creating a safety concern that keeps the machine off the floor. Recognizing this risk, we verify every order against your machine model before dispatch to eliminate fitment surprises [NEED_CITE: forklift throttle linkage misidentification and fleet safety implications].
Our Guangzhou warehouse stocks this accelerator rod for immediate single-piece dispatch, removing minimum order barriers that block emergency repairs. Part identification works from a part number, a machine model, or a photograph of the old component β whichever information you have on hand. Every unit ships under the same warranty terms whether produced on our own line or sourced from a qualified ISO-certified partner. Cross-reference verification covers superseded numbers so you receive the correct current variant, not an obsolete listing copied from an outdated catalog.
Provide the part number stamped on your existing rod, the Toyota forklift model plate, or a clear photograph of the component in situ. We will verify compatibility and confirm dispatch timing so you know exactly when the accelerator rod 26607-26602-71 in stock will arrive at your facility.
Q: Is this accelerator rod in stock right now and when can it ship? A: Yes, accelerator rod 26607-26602-71 is held in our Guangzhou warehouse. Once payment is confirmed, packing and handover to the courier typically happen the same or next working day. Express delivery reaches most international destinations within several business days.
Q: Can I order just one piece for an urgent forklift repair? A: Absolutely. Our minimum order is one piece, so there is no quantity barrier for a single emergency replacement. This is standard policy across our entire range, not a special exception for urgent cases.
Q: My nameplate is worn β how do I confirm the right part number? A: Send a photograph of the machine model plate, the serial number tag, or the old rod itself. Our technical team cross-checks against Toyota forklift build records and responds with a confirmed fitment match within hours during business days.
Q: What happens if the part I receive does not fit my machine? A: Contact us immediately with photographs of the fitment issue. We verify the discrepancy against the order records and arrange the correct replacement. Every accelerator rod ships under our warranty covering manufacturing and identification errors on our side.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Connecting Rod 719810-23100 for Yanmar 3TNE78 & Komatsu 3D78AE Engines β forged...
Connecting Rod 115026330 (cross-reference) for Shibaura N844 / N844L and New Holland...
Stock availability and estimated arrival window quoted at time of order
Get your Shibaura N844 or New Holland tractor back to peak performance...
