In Stock Turbocharger 482-8480 Compatible with CAT C3.8 Engine
Turbocharger 482-8480 (cross-reference only) for CAT C3.8 engines on 272D2, 299D3 and...
Turbocharger 7030304, GT1241Z model, compatible with Doosan D24 engine — stocked in our Guangzhou warehouse for rapid dispatch to job sites and workshops.
Dispatch from stock keeps your Bobcat skid steer or track loader running without delay.
In stock for dispatch — Guangzhou warehouse holds this GT1241Z turbocharger ready to ship, so a downed Bobcat skid steer does not sit idle waiting for production lead times.
| Parameter | Value |
|---|---|
| Part Number | 7030304 |
| Product Type | Turbocharger |
| Turbo Model | GT1241Z |
| Compatible Engine | Doosan D24 |
| Condition | New Aftermarket |
| Warranty | 3-12 months against manufacturing defects |
| Cross-Reference | 7030304, 7957870003, 7957870007, 7957870016, 15010500044, 150105-00044, 7030304EF, 7030304R, 7030304REM, 7957875003S, 795787-5007S, 795787-5016S (cross-reference only for identification purposes) |
| Machine Fitment | Bobcat E42, E45, E50, E55, E85, S510, S530, S550, S570, S590, S595, S630, S650, 5600, 5610, T450, T550, T590, T595, T630, T650; Doosan models with D24 engine |
| Failure Symptom | Replacement Urgency |
|---|---|
| Loss of power under load, black smoke from exhaust | Immediate — machine cannot complete work cycles at rated capacity |
| High-pitched whining or metallic scraping from turbo housing | Same-day removal recommended to prevent shaft disintegration |
| Excessive oil consumption with blue exhaust smoke | Schedule within days — indicates seal ring wear inside bearing housing |
| Slow spool-up response when throttle applied | Plan replacement before next shift to avoid operator frustration and fuel waste |
A confirmed GT1241Z turbocharger 7030304 in stock fast shipping replacement leaves Guangzhou within days, not weeks.
I once had a contractor send a blurry photo at two in the morning, convinced he needed a GT1241Z 7030304 for his Doosan D24. The image was so grainy I could barely read the casting marks. We cross-checked against his machine serial and discovered the turbo had been swapped during a prior rebuild — the number on the housing was from a completely different model line. Shipping the wrong unit would have cost him days of additional downtime. That situation forced me to tighten our photo-based identification process until fitment confirmation happens in hours rather than days [NEED_CITE: turbocharger misidentification causes on compact diesel equipment]. When a skid steer or compact track loader sits non-productive on a job site, every hour of waiting for part confirmation is an hour the crew cannot work.
Availability means nothing if the part does not bolt on. Send a clear photo of the old turbocharger, the machine model plate, or even just the Bobcat or Doosan model designation. Our team cross-checks the GT1241Z turbocharger 7030304 in stock fast shipping replacement against known superseded numbers and variant differences within the D24 engine family. Most confirmations come back within hours so you can commit to a purchase with confidence rather than guesswork.
Once fitment is verified, the dispatch clock starts. Stock in our Guangzhou warehouse means this turbocharger does not need to be sourced or manufactured after your order. Express courier, air freight, and sea freight options are all available, and we quote estimated arrival timing before you pay — not after [NEED_CITE: aftermarket turbocharger freight options and transit expectations for construction equipment parts]. Time zones work in your favor here: inquiries sent during North American or European evening hours are typically answered by the next morning in those regions, keeping the ordering cycle tight.
The GT1241Z model designation tells you the compressor wheel diameter class and turbine geometry built for the Doosan D24 displacement and exhaust flow characteristics. This turbo operates in a compact engine bay where heat soak from adjacent hydraulic lines and the radiator stack is constant, so the bearing housing must tolerate sustained thermal load without oil coking. The new aftermarket condition means bearing clearances and seal ring seating are set to factory specifications, which matters because a turbo on a D24 sees sustained boost pressure through long digging cycles. The 3-12 month warranty covers manufacturing defects so a casting porosity issue or out-of-balance rotating assembly does not become your financial problem.
A turbocharger that arrives and does not fit means the machine stays down for another full shipping cycle. On a Bobcat S550 or T590 sitting on a graded lot or a trenching job, that second wait compounds crew idle time, rental equipment costs, and missed project milestones [NEED_CITE: equipment downtime compounding costs on compact construction sites]. I have seen contractors accept a visually similar turbo that bolted on but had the wrong wastegate actuator orientation — it ran, but boost pressure was wrong and the engine went into limp mode within hours. The machine was down again before the week ended.
Our own production lines and qualified sourced supply share the same QC protocols and warranty terms, so you deal with one account regardless of where the part was built. The eight product categories we cover mean you can add oil feed lines, gaskets, or air filters to the same shipment if needed. Minimum order of one piece means a single broken machine gets a single turbocharger without waiting to build a bulk order. Guangzhou warehouse stock on high-demand items like this turbocharger enables rapid dispatch. Part identification from a photograph, machine model, or worn nameplate removes the barrier when the original data plate is gone.
Send the part number from your old turbocharger, a photo of the nameplate or casting marks, or simply your Bobcat or Doosan machine model. We will confirm whether this GT1241Z turbocharger 7030304 in stock fast shipping replacement fits your exact unit, quote freight options with arrival estimates, and get it moving toward your site.
Q: Is this GT1241Z turbocharger actually in stock right now? A: We hold this turbocharger in our Guangzhou warehouse for fast dispatch. Stock levels change as orders ship, so we confirm real-time availability when you inquire. Most requests receive a stock confirmation within hours, along with freight options and estimated arrival timing for your destination.
Q: Can I order just one turbocharger, or is there a minimum quantity? A: The minimum order is one piece. This turbocharger is stocked specifically to support single-machine emergency repairs. You do not need to build a bulk order or wait to combine purchases before your unit ships out.
Q: How fast can it arrive if I need it urgently? A: Express courier and air freight options are available from Guangzhou. We quote estimated arrival timing before you commit, so you know exactly when the turbocharger reaches your location. Transit duration depends on destination and chosen service level.
Q: My turbo nameplate is worn off — can you still confirm fitment? A: Yes. Send a photo of the old turbocharger, your machine model, or the engine plate. We cross-check against superseded numbers and known variants within the Doosan D24 engine family to verify compatibility before anything ships.
Q: What if the turbocharger arrives and does not fit my machine? A: Contact us immediately with photos showing the fitment discrepancy. We cross-reference your machine details against our records and arrange resolution under our warranty terms. This is exactly why we verify fitment before dispatch whenever possible.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Turbocharger 482-8480 (cross-reference only) for CAT C3.8 engines on 272D2, 299D3 and...
Single-unit emergency orders ship within 24 hours with real-time tracking to match...
Restore peak engine performance in your Kubota V2607-DI or Bobcat S160/S185 with...
Restore peak performance to your Deutz BF4L2011/BF4M2011 engine with the reliable Turbo...