6655233 Glow Plug replacement for Kubota V1903, V2003, V2203 engines and Bobcat 751, 763, S160 skid steer loaders, 4 pieces per pack, new aftermarket condition with 3β12 months warranty. In stock at Guangzhou warehouse, single-piece minimum order accepted for emergency cold-start repairs, with express and air freight options quoted upfront. Arrival timing confirmed at order placement, and photo-based part identification available when nameplate is unreadable.
Stock Ready to Ship β Guangzhou warehouse holds this Glow Plug 6655233 for cold-start failures that cannot wait for a backorder.
| Parameter | Value |
|---|---|
| Part Number | 6655233 |
| Product Type | Glow Plug |
| Cross-Reference | 6655233 (reference only) |
| Machine Fitment | Kubota V1903 2EB Tier II, V2003T Tier I, V2003T, V2003-T-2EB Tier II, V2203 2EB Tier II, V2203, D1703-E2B Tier II, D1703-M-E3B Interim Tier IV; Bobcat 1600, 325, 328, 329, 331, 334, 337, 341, B300, BL370, BL470, BL475, BL570, BL575, 645, 743, 751, 753, 763, 773, 7753, S150, S160, S175, S185, 5600, T190 |
| Packaging | 4 Pieces |
| Condition | New Aftermarket |
| Warranty | 3β12 months against manufacturing defects |
| Minimum Order Quantity | 1 piece |
| Quality Standard | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Engine cranks but will not fire in cold ambient temperatures | Immediate β machine is non-operational until starting circuit is restored |
| Extended white smoke on cold start indicating incomplete combustion | High β plug degradation accelerates and may damage glow circuit relay |
| Glow plug warning lamp stays on or flickers during warm-up | Moderate β intermittent failure often precedes total element burnout |
| One cylinder misfires on first start of the shift | Immediate on multi-cylinder Kubota V2203 and D1703 variants |
A Glow Plug 6655233 in stock fast shipping replacement leaves the warehouse the same day the order is confirmed.
When a Bobcat S160 sits silent on a frosty morning, every hour of downtime costs the crew standing around an idle machine. Waiting several days just to confirm whether the part number on a faded nameplate matches the engine is time the job site does not have. I have watched contractors lose entire shifts because a single glow plug failed and no supplier would ship less than a full set. [NEED_CITE: impact of cold-start failure on small equipment utilization in construction]
The Glow Plug 6655233 in stock fast shipping replacement is confirmed available before you commit to an order. Our Guangzhou dispatch point carries inventory specifically for high-failure cold-start components across the Kubota V-series and Bobcat loader range. When a machine is already down, the difference between a same-day dispatch and a multi-week backorder is the difference between finishing the pour on schedule and paying for a remobilization.
A Bobcat 753 rolled in after dark with the nameplate painted over by three owners of spray paint. The only readable marking was the engine serial prefix. Within hours, the engine model was confirmed as a Kubota V1903 2EB Tier II, and the correct glow plug was identified without guessing. This is how emergency part identification actually works on a job site β not from a catalog number, but from whatever the machine still shows.
A Glow Plug 6655233 in stock fast shipping replacement ships via express courier, air freight, or consolidated sea freight, with the estimated arrival window stated at the time of quotation β not after the invoice is paid. Small, lightweight components like glow plugs are ideal for air freight, meaning a machine in most regions can be back online within days rather than weeks. [NEED_CITE: express freight transit benchmarks for small construction parts]
The process is straightforward: you send a part number, a machine model, or a photograph of the engine plate. The part is verified against the fitment list β Kubota V2003T, V2203, D1703 series, and the full Bobcat skid steer and excavator range. Once confirmed, the Glow Plug 6655233 in stock fast shipping replacement is packed and handed to the carrier. There is no intermediate approval chain delaying a single-piece emergency order.
Each set contains four glow plugs, individually protected to prevent thread damage during transit. The compact package size keeps air freight costs manageable and allows the shipment to ride as a small parcel rather than requiring palletized handling. Whether you need one piece for a single failed cylinder or the full four-piece set for a preventive swap across all cylinders, the packaging adapts to the order.
The glow plug raises the combustion chamber temperature in a diesel engine to the point where fuel auto-ignites during cranking. For Kubota V-series indirect injection engines β the V1903, V2003, V2203, and D1703 β the plug element must reach a consistent tip temperature within seconds. The heating element wire and regulating coil work together: the regulating coil increases resistance as temperature rises, preventing the tip from overheating and burning out during extended glow cycles. This self-regulating behavior is critical because the operator may hold the glow cycle for varying durations depending on ambient conditions. ISO 9001 production standards ensure element consistency across every plug in the set. [NEED_CITE: diesel glow plug self-regulating coil design principles]
Sending a glow plug with the wrong thread pitch or reach length into a Kubota cylinder head means either it will not seat β leaving compression leakage β or the tip protrudes too far into the pre-chamber and breaks off under combustion pressure. I have seen a V2203 come back with a fractured plug tip lodged in the pre-chamber because the incorrect reach allowed the element to sit in the flame path. That turns a simple plug swap into a head removal. Confirming the Glow Plug 6655233 in stock fast shipping replacement against your specific engine variant avoids this entirely. [NEED_CITE: glow plug reach mismatch and pre-chamber damage in small diesel engines]
Production on selected lines and qualified sourced supply carry the same QC and warranty terms, so you receive consistent quality regardless of the manufacturing origin. Eight product categories under one account mean the glow plugs can ship alongside filters, seal kits, and engine gaskets in a single consignment. The one-piece minimum order exists because emergency repairs do not respect bulk quantities. Guangzhou warehouse stock enables same-day dispatch for common cold-start components. Part identification works from a number, a machine model, a photograph, or a worn nameplate image β whichever is all you have at the breakdown site. Cross-reference verification covers superseded and alternate numbers so you are not guessing whether an older listing still applies.
Provide the part number from the old plug, the Kubota or Bobcat machine model, or a clear photograph of the engine nameplate. The engine variant β whether a V1903, V2003T, V2203, or D1703 β determines the exact glow plug specification, and confirming this up front is faster than shipping a guess and waiting for a return.
Q: Is this glow plug in stock and ready to ship right now? A: Stock status for the 6655233 glow plug is confirmed in real time before you place an order. The Guangzhou warehouse carries inventory for Kubota V-series and Bobcat loader applications, and same-day dispatch is standard for orders confirmed during business hours. You will receive a packing photograph and tracking details upon handover to the carrier.
Q: Can I order just one glow plug for an emergency repair? A: Yes. The minimum order is one piece. Emergency breakdowns rarely need a full set, and there is no bulk requirement blocking a single-piece purchase. If only one cylinder plug has failed on your Kubota V2203 or Bobcat S160, you can order the exact quantity needed without carrying excess inventory.
Q: How fast can the glow plug arrive at my location? A: Arrival timing depends on your region and chosen freight method. Express courier typically delivers within days for small parcels like glow plug sets. Air freight suits consolidated orders with additional parts. The estimated delivery window is quoted upfront alongside the freight option, so you know the arrival date before committing.
Q: My engine nameplate is unreadable β can you identify the correct part from a photo? A: Yes. A clear photograph of whatever markings remain on the engine block, the old glow plug itself, or even the machine serial plate is often sufficient. The Kubota and Bobcat fitment list covers multiple engine variants, and cross-referencing from a photo avoids the risk of shipping the wrong reach or thread specification.
Q: What happens if the part does not match my machine? A: If the confirmed fitment proves incorrect upon arrival, the part is exchanged under the warranty terms covering manufacturing and identification errors. Providing the machine model or engine serial at the time of order significantly reduces this risk, as every dispatch is verified against the application list before it leaves the warehouse.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Arrival timing confirmed before you commit, so your downed machine gets back...
Alternator 27060-UB050 (cross-reference) for Toyota 4Y engine forklifts, 12V β compatible with...
Starter Motor 6670727, 12V 2.2KW 10T β replacement for Bobcat Excavator 325,...
Recoil Starter 28400Z0DV04ZA, replacement for MTX60 & MTX70 rammers β new aftermarket...
