Drive Pump Belt 6726898 Replacement for Bobcat Loaders Same-Week Shipping

Ready to Ship — Drive pump belt 6726898 sits on our Guangzhou shelf, packed and labeled so it leaves within working hours once you confirm the machine model.

Technical Specifications

Application Suitability

What Arrives Before the Machine Can Move Again

This drive pump belt 6726898 in stock is ready to leave our Guangzhou warehouse the same day you confirm your loader model.

I have watched a Bobcat S175 sit idle for three full days because someone ordered a belt based on a faded nameplate photo, and the part that arrived was two inches short. The operator could not even use the loader for light grading while waiting. A worn or painted-over label turns a ten-minute job into a week-long standstill, and every day the machine is not working, the rental meter still runs [NEED_CITE: equipment downtime cost impact in rental fleets]. That is why confirmation has to happen before the parcel leaves, not after it arrives wrong.

How We Confirm the Right Belt Before Dispatch

We pull the Drive Pump Belt 6726898 from stock only after matching your machine model against our fitment records. A clear photo of the old belt next to a tape measure, or a shot of the nameplate even if the paint is chipped, is usually enough to confirm length and groove count. For Bobcat loaders in the S130 through S205 range, the three-groove cogged profile at 57.4 inches is the correct reference, but sending the model eliminates any doubt.

Arrival Timing and What Controls It

Once the belt is packed, courier options like DHL or FedEx move it from Guangzhou to most destinations within a matter of days. Sea freight is available for larger combined orders but adds a multi-week transit window that does not suit an emergency breakdown. We provide the tracking number and packing photographs the moment the parcel is handed over, so you can watch it move and plan the mechanic's slot accordingly [NEED_CITE: express freight transit standards for aftermarket parts]. Our dispatch team works across time zones, so an inquiry that lands outside your business hours still gets a stock confirmation and shipping quote before your next morning.

Reading the Specifications That Matter on Site

The 57.4-inch length and 1.19-inch width are not arbitrary; they match the pulley spacing and tensioner range on the compatible Bobcat loaders. A belt even slightly shorter would overload the tensioner spring, while a longer one would slip under hydraulic pump load. The three-groove cogged design lets the belt flex around the smaller drive pulley without the cracking that a smooth-back belt develops after a few hundred hours. Fiber-loaded backing with cord support resists the stretching that turns a properly tensioned belt into a slipping one midway through a demolition shift.

What Happens When the Wrong Belt Ships

A belt that is the wrong length or groove profile does not just fail to fit; it forces the mechanic to release the tensioner, remove the belt, wait for the correct part, and repeat the entire procedure. On a job site where the loader is the only machine handling material, those extra days cascade into missed truck-loading windows and delayed trench backfilling [NEED_CITE: cascading downtime effects on single-machine job sites]. In a workshop, the machine occupies a bay that could have been turned over to the next repair, squeezing the schedule for every job behind it.

Why Procurement Teams Route Urgent Belt Orders Here

Our Guangzhou warehouse keeps this Drive Pump Belt 6726898 in stock so that an emergency single-piece order ships without waiting for a production run. We accept identification from a machine model, a worn label photograph, or a nameplate image, removing the guesswork when the part number is unreadable. The single-piece minimum order means you are not forced to buy ten belts when only one loader is down. Each belt carries the same warranty terms whether it comes from our own production line or a qualified ISO-certified partner. Our technical team verifies cross-reference numbers, including superseded references, before confirming dispatch.

Documentation & Verification

• Commercial invoice listing drive pump belt part number and Bobcat loader compatibility
• Cross-reference sheet showing 6726898 as interchange reference for identification
• Quality inspection record confirming belt length, width, and groove count before packing
• Warranty terms covering manufacturing defects for 3–12 months
• Packing photographs showing individual retail packaging with foam protection
• HS code and customs documentation support for international express shipments

Stock, Shipping & Arrival

• Drive pump belt 6726898 in stock at Guangzhou warehouse for same-week dispatch
• Express courier transit typically delivers within days for urgent single-piece orders
• Individual retail packaging with protective foam withstands express courier handling
• Tracking number and packing photos provided upon dispatch for full visibility
• Arrival timing quoted upfront based on destination and chosen freight method

Quick Identification to Get Your Loader Running

Send us the machine model such as S175 or T190, or a photograph of the worn belt and pulley area, so we can confirm fitment and dispatch timing in a single exchange. The more detail in the photo, the faster we lock in the correct reference and move the parcel to courier.

Frequently Asked Questions

Q: Is the drive pump belt 6726898 currently in stock and when can it ship? A: Yes, this belt is stocked in our Guangzhou warehouse and typically leaves within working days of order confirmation. We provide a specific dispatch window and express courier options when you send your machine model, so you know exactly when to expect delivery at your workshop or job site.

Q: What is the minimum order quantity — can I buy just one belt? A: The minimum order is one piece. We understand that a single Bobcat loader may be down and you do not need ten belts sitting on a shelf. Single-piece orders receive the same packing care, warranty coverage, and dispatch priority as larger shipments.

Q: How long does express delivery take to my destination? A: Express courier services such as DHL, FedEx, or UPS typically deliver within days from Guangzhou, depending on your location and customs clearance speed. We quote the estimated arrival window before you confirm the order, so there are no surprises after dispatch.

Q: The nameplate on my Bobcat is worn or painted over — can you identify the belt from a photo? A: Yes. Send a clear photograph of the old belt, the pulley area, or any remaining label text. We cross-check the groove count, length, and machine model against our fitment records to confirm whether 6726898 (reference only) is the correct match before shipping.

Q: What happens if the belt arrives and does not fit my machine? A: Our warranty covers manufacturing defects for 3–12 months, and we work with you to resolve fitment issues. If the belt does not match despite our pre-dispatch verification, we arrange a replacement or refund according to our warranty terms, and our technical team assists with re-identification.