7302291 Belt Tensioner Kit, Cooling Fan Belt Drive, High-Strength Steel β replacement for Bobcat skid steer and track loaders including 653, 753, 863, S160, S185, S205, T190, T250 and A300 series.
Ships from stock with lead time confirmed at quotation for your machine-down situation.
Stock Ready β 7302291 tensioner kits sitting on Guangzhou shelves, dispatched within 24 hours after photo or serial confirmation.
| Parameter | Value |
|---|---|
| Part Number | 7302291 |
| Product Type | Belt Tensioner |
| Cross-Reference | 7302291 (for identification purposes) |
| Machine Fitment | Bobcat 653, 751, 753, 763, 773, 7753, 853, 863, 864, 873, 883, 963, S130, S150, S160, S175, S185, S205, S220, S250, S300, T140, T180, T190, T200, T250, T300, A220, A300 |
| Part Name | Cooling Fan Belt Tensioner Kit |
| Condition | New Aftermarket |
| Material | High-strength steel with corrosion-resistant coating |
| Assembly State | Kit |
| Warranty | 3-12 months against manufacturing defects |
| Quality Standard | ISO 9001 |
| Failure Symptom | Replacement Urgency |
|---|---|
| Engine overheating during sustained high-RPM work cycles | Immediate β machine must be shut down to prevent cylinder head or gasket damage |
| Squealing or chirping noise from fan belt area at idle or under load | High β belt may slip off pulley within operating shifts |
| Visible wobble or lateral play in tensioner arm during inspection | Moderate β schedule replacement before next heavy-duty shift |
| Cracked or delaminated belt surface traced to insufficient tension | High β secondary failure of water pump or alternator drive possible |
| Belt thrown off repeatedly despite correct routing and alignment | Immediate β tensioner spring fatigue or pivot bearing seizure likely |
A confirmed 7302291 Cooling Fan Belt Tensioner Kit leaves our Guangzhou warehouse the same day the order is verified.
Waiting for a part number confirmation can eat up several working days while the loader sits idle on site. A foreman in Guangdong once sent a blurred nameplate photo at 2 a.m., and the unit model alone was not enough to distinguish between early and late-production tensioner bracket variants. The wrong kit arrived, the belt path did not clear the fan shroud, and the machine waited another three days for the correct replacement [NEED_CITE: skid steer loader cooling system tensioner variant differences by serial range]. That delay is what drives our process now β every inquiry on a Cooling Fan Belt Tensioner 7302291 in stock request gets cross-checked against the machine serial before the box leaves the shelf.
When the nameplate is readable, the path is straightforward: part number 7302291 in stock, matched to the serial range on your Bobcat skid steer or track loader, confirmed within the same exchange. When paint overspray or abrasion has obscured the plate, we ask for a photograph of the existing tensioner arm and pivot bracket. Mounting hole spacing, pivot bolt diameter, and spring anchor orientation differ between early 753 production runs and later S-series models, and a single photograph usually resolves the question. Our Guangzhou warehouse team handles these Cooling Fan Belt Tensioner 7302291 in stock checks across time zones, responding to inquiries outside standard business hours because breakdowns do not follow office schedules.
Express courier services β DHL, FedEx, UPS β typically deliver the tensioner kit within a short window to most destinations with established logistics routes. Air freight suits consolidated orders where a repair shop is combining the tensioner with gaskets, filters, and seal kits in a single shipment, trading slightly longer transit for lower cost per kilogram. Sea freight applies when the order volume justifies container space and the machine is not yet down. We quote the estimated arrival window at the time of order confirmation, not after the invoice is issued, so the site supervisor can plan the repair slot around a known delivery date. Every Cooling Fan Belt Tensioner 7302291 in stock order ships with tracking forwarded the moment the carrier collects the parcel [NEED_CITE: international express courier transit benchmarks for machinery parts].
The kit format means the tensioner arm, pivot bolt, spring, and mounting hardware arrive together, eliminating the mismatch risk that occurs when individual components are sourced from separate suppliers. High-strength steel construction with a corrosion-resistant coating addresses the environment inside a skid steer engine compartment, where coolant mist, diesel residue, and fine abrasive dust combine to attack unprotected surfaces. The assembly-state designation ensures the spring preload is set to the specification required for Bobcat cooling fan circuits across the compatible model range, rather than relying on a generic tensioner adjusted to an unknown baseline. These parameters are what separate a fit-and-forget installation from one that requires re-tensioning within the first hundred operating hours.
Sending an incorrect variant means the machine stays down through an entire return-and-reship cycle, and on a rental fleet or contracted job that idle time compounds into penalty clauses and schedule slip. A workshop that forces a near-fit tensioner onto the bracket risks uneven belt wear, premature bearing failure in the idler pulley, and a second teardown within weeks. The financial exposure from a single misidentified Cooling Fan Belt Tensioner 7302291 in stock order goes far beyond the freight cost of the replacement [NEED_CITE: equipment downtime cost multipliers in construction equipment rental]. Photo verification and serial cross-reference exist specifically to remove that exposure before the parcel is sealed.
Our own production lines and qualified sourced supply carry identical quality control and warranty terms, so the buyer deals with one accountability point regardless of which facility produced the batch. Eight product categories β from belt drive through undercarriage β ship under a single account and a single consignment, removing the coordination overhead of managing several suppliers for one repair job. The one-piece minimum order means an emergency single-kit purchase is never blocked by volume thresholds. Warehouse stock in Guangzhou enables same-day dispatch on fast-moving items like this tensioner. Part identification from a photograph, serial number, or nameplate image replaces the guesswork that leads to wrong-part shipments. Cross-reference verification covers superseded numbers so older machines are not left without support.
To confirm stock and receive a transit estimate for a Cooling Fan Belt Tensioner 7302291 in stock, share the Bobcat machine model and serial number or a clear photograph of the existing tensioner and nameplate. Our team will verify fitment against the serial range and reply with the dispatch window and available shipping options so the repair schedule can be set before the kit arrives.
Q: Is the 7302291 Cooling Fan Belt Tensioner Kit currently in stock and how fast can it ship? A: The kit is held as regular warehouse stock in Guangzhou. Once you provide the machine model or serial number for fitment confirmation, dispatch can occur the same working day. Express courier services typically deliver within a short transit window to destinations with established logistics routes. Tracking details are forwarded as soon as the carrier collects the parcel.
Q: Can I order just one tensioner kit, or is there a minimum order quantity? A: One piece is the minimum. There is no volume threshold for this or any other part in our catalogue. Emergency single-kit orders are processed with the same priority as larger consignments, and the pricing structure does not penalize small quantities. The kit ships in its own protective packaging suitable for express courier handling.
Q: How long does delivery take to my job site or country? A: Transit time depends on the destination and chosen freight method. Express couriers offer the fastest arrival for urgent single-kit orders, while air freight suits consolidated shipments and sea freight fits larger planned orders. We provide an estimated arrival window at the point of order confirmation so you can schedule the repair slot around a known delivery date.
Q: The nameplate is unreadable β can you confirm fitment from the machine model alone? A: Yes, in most cases. Send a photograph of the old tensioner showing the pivot bracket, mounting holes, and spring anchor. We cross-reference these visual details against known production variants for your Bobcat model range. If two variants exist for the same model, the photograph usually reveals which version your machine requires, preventing a wrong-part shipment.
Q: What happens if the tensioner kit arrives and does not fit or has a defect? A: The kit carries a 3-12 month warranty against manufacturing defects. If a fitment discrepancy is discovered upon arrival despite our pre-dispatch verification, notify us with photographs of the installed position and the kit components. We will identify the mismatch cause and arrange a correct replacement. The warranty covers material and workmanship issues found within the coverage period.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
Alternator Belt 78-1918 / 78-1543, Replacement for Thermo King Tripac APU β...
Belt Tensioner 04133543 replacement for Deutz D2.9L4, TD2.9L4, TD2.9L04 engines β new...
Belt Tensioner 5333477, replacement for Cummins 4BT / 6BT 5.9L / B3.9L...
Clutch Drive Belt 3211218 (cross-reference 26C4057), aramid-reinforced EPDM compound, 1,120 mm pitch...
