12V Starter Motor 6676957 6685190 | Ready to Ship for Kubota V2203 V3300 Bobcat

Ready to Ship — Guangzhou warehouse holds this starter motor for Kubota and Bobcat units, enabling same-day dispatch on confirmed orders.

Technical Specifications

Application Suitability

When the Machine Will Not Crank and Every Hour Costs Money

Get the right 12V starter motor 6676957 in stock fast shipping replacement for Kubota Bobcat identified and dispatched before the next shift starts.

A skid steer that will not start is not just sitting idle — it is blocking the entire crew. Operators stand around, the next trade cannot begin, and rental charges keep running. The frustration deepens when the part number on the old starter is worn away or the nameplate is covered in grease and paint. In the Shandong equipment repair belt, I once received a blurry nameplate photo from a customer at night, shipped what I thought matched, and the starter did not fit a Bobcat T2250. That machine sat dead for three extra days waiting for the correct unit. [NEED_CITE: equipment downtime cost analysis for compact loaders in construction]

Since then, the rule is simple: verify the cross-reference before anything leaves the shelf. The 6676957 and 6685190 references both map to the same 12V 2.7kW PLGR unit, but variant differences in mounting flange orientation and connector type can exist between machine generations. Sending the wrong one means another freight cycle, another three days, another rental bill.

Availability and Part Number Confirmation

This 12V starter motor 6676957 in stock fast shipping replacement for Kubota Bobcat is held at our Guangzhou warehouse, which means confirmed orders move to packing within the same business day. There is no minimum order quantity — a single starter for an emergency repair ships exactly the same way as a ten-unit batch for a fleet workshop. If the original label is unreadable, send a photograph of the machine nameplate, the old starter body, or the engine block casting. The technical team cross-checks against the Kubota V2203 and V3300 build records to confirm whether the 11-tooth PLGR unit matches your specific serial range.

Delivery Timing and Freight Options

The total arrival window has two parts: dispatch time and transit time. Dispatch from Guangzhou typically takes two to five working days once payment and fitment are confirmed. From there, express courier reaches most international destinations in roughly one week, air freight in two to three weeks, and sea freight in four to six weeks depending on port. For a machine already down on a jobsite, express is the standard choice. Tracking numbers are provided as soon as the courier collects the parcel, and arrival estimates are quoted at the point of order — not buried in a follow-up email. [NEED_CITE: international freight transit time comparison for construction spare parts]

Electrical Specifications That Matter on the Jobsite

The 2.7 kW rating at 12 Volts places this starter in the mid-range for Kubota V2203 and V3300 diesel engines. That power level is necessary because these engines run high compression ratios typical of indirect and direct injection diesel designs, requiring strong initial cranking torque. The PLGR — Permanent Magnet Gear Reduction — design multiplies motor torque through an internal planetary gear set, which means the unit delivers strong cranking force from a compact housing. Clockwise rotation matches the flywheel direction on the compatible Kubota engine family. The 40.2mm pinion outer diameter and 11-tooth spline must mesh cleanly with the flywheel ring gear; even minor wear on the ring gear can cause engagement issues that look like starter failure. Three unthreaded mounting holes at 11.7mm ID secure the unit to the engine block bell housing, and these bolt positions must match the block casting precisely.

The Hidden Cost of a Wrong Part Number Guess

Shipping a starter that does not fit means the machine stays down through another full freight cycle. On a track loader like the Bobcat T770 working a paving subcontract, three days of lost production can cascade into missed completion milestones. Even when a starter physically bolts on but has the wrong pinion tooth count, it may engage roughly and damage the flywheel ring gear over time — converting a simple starter swap into an engine-out repair. That lesson from the T2250 incident in Shandong stays relevant: guessing from a blurred photograph is never worth the risk. [NEED_CITE: flywheel ring gear damage caused by mismatched starter pinion engagement]

Why Source This Starter From XUNPO

XUNPO produces selected part lines in-house and sources the remainder from qualified ISO-certified manufacturing partners, meaning this starter carries the same QC and warranty terms regardless of production origin. The eight-category product range means you can add filters, seal kits, or belt-drive components to the same order without opening a second account. A single-piece minimum order removes the barrier for emergency repairs. Guangzhou warehouse stock on common fast-failure items like starters enables rapid dispatch. Part identification works from a part number, machine model, or photograph — the technical team verifies cross-references including superseded numbers before confirming the order. Sample supply is available for fitment confirmation before a fleet buyer commits to a bulk quantity.

Documentation & Verification

• Commercial invoice and packing list with 6676957 and 6685190 references clearly marked
• Part compatibility sheet listing verified Kubota and Bobcat machine serial ranges (reference only)
• Quality inspection record covering pinion runout and no-load current draw
• Warranty terms document stating coverage period against manufacturing defects
• Packing photographs taken before carton seal for condition verification
• HS code and customs documentation support for international starter motor shipments

Stock, Shipping & Arrival

• Starter motors are confirmed against real-time Guangzhou warehouse inventory before order acceptance
• Express, air, and sea freight options quoted with estimated arrival windows at order placement
• Carton packing with internal cushioning protects the pinion gear and mounting flange during transit
• Tracking numbers issued immediately upon courier collection for full shipment visibility
• One-piece orders ship without waiting to consolidate a minimum batch quantity

Request a Fitment Check

Provide the old starter part number, a photo of the machine nameplate, or the engine model and serial number so the technical team can confirm the correct variant. For fleet buyers with multiple machines, send the full equipment list to receive matched starter references and consolidated freight quotes. The faster the identification details arrive, the faster the unit is on its way.

Frequently Asked Questions

Q: Is this starter motor in stock and ready to ship? A: Yes, the 12V 2.7kW starter motor carrying cross-references 6676957 and 6685190 is stocked at the Guangzhou warehouse. Real-time availability is confirmed at the point of order, and dispatch typically begins within two to five working days once fitment and payment are verified.

Q: What is the minimum quantity I can order? A: The minimum order is one piece. There is no MOQ requirement, so a single starter for an emergency repair ships under the same process as a bulk order. This is designed for workshops and site teams that need exactly one unit to get a machine running again.

Q: How long will delivery take to my location? A: Transit time depends on the freight method and destination. Express courier typically arrives within about one week, air freight in two to three weeks, and sea freight in four to six weeks. Arrival estimates are quoted upfront when the order is placed, not after dispatch.

Q: The nameplate is worn — can I confirm fitment from a photo? A: Yes. Send a clear photograph of the old starter, the engine block, or any visible casting numbers. The technical team cross-references the image against Kubota V2203 and V3300 build records to verify whether the 11-tooth PLGR unit with 40.2mm pinion OD matches your machine.

Q: What happens if the part arrives and does not fit? A: Fitment is verified before dispatch using the part number, machine model, or photographs you provide. If a mismatch still occurs despite verification, contact the technical team immediately with installation photos so a resolution — replacement or return guidance — can be arranged promptly.