16851-60014 Fuel Stop Solenoid, 12V DC, stainless steel plunger β compatible with Kubota BX, GR, G and TG series tractors. Kept in Guangzhou warehouse stock for same-week dispatch, single-piece minimum order, and part confirmation within 2 hours from machine model or nameplate photo. Multiple freight options available with real-time tracking to your door.
Stock status confirmed at order, with arrival timing quoted upfront for your chosen shipping method.
Ready from Stock β This 12V fuel stop solenoid ships from our Guangzhou warehouse within days, not weeks, keeping your Kubota tractor out of the ditch.
| Parameter | Value |
|---|---|
| Part Number | 16851-60014 |
| Product Type | Stop Solenoid |
| Cross-Reference | 052600-4530, 052600-4531, 16851-60010, 16851-60012 (reference only) |
| Machine Fitment | Kubota B7410D, BX1500D, BX1800D, BX1830D, BX1850D, BX1860, BX2230D, BX2350D, BX24D, BX25, G1700, G1800, G1900, G2160, GR2100, GR2110, GR2120, T1600H, TG1860 |
| Electrical Rating | 12V DC |
| Insulation Class | Class H |
| Operating Temperature Range | -20Β°C to +85Β°C |
| Plunger Material | Stainless Steel |
| Housing Material | Hardened Carbon Steel |
| Seal Material | Nitrile Rubber (NBR) |
| Dimensional Tolerance | Β±0.05 mm |
| Condition | New Aftermarket |
| Warranty | 6-month standard warranty against manufacturing defects |
| MOQ | 1 piece |
| Failure Symptom | Replacement Urgency |
|---|---|
| Engine fails to shut off when key is turned | Immediate β safety hazard requiring same-day replacement |
| Solenoid clicks but fuel rack does not move | High β machine unusable until solenoid or linkage is freed |
| Intermittent stalling during operation | Medium β unreliable shutdown risks engine damage |
| Visible corrosion on solenoid housing or terminals | Low β plan replacement before field season begins |
A 12V Fuel Stop Solenoid 16851-60014 in stock fast shipping sounds simple until you discover that Kubota used several solenoid body lengths across the BX and GR series, and the wrong length will not seat against the fuel pump housing. The plunger stroke and housing flange must match your specific engine block casting.
I have watched a BX2350D sit idle for three extra days because the supplier sent the 16851-60015 variant without checking the engine serial range [NEED_CITE: Kubota engine serial number identification for fuel system components]. The part number alone does not always tell the full story, which is why we ask for a machine model or a photo of the old solenoid before confirming dispatch.
When a tractor stops mid-job, every hour of confirmation back-and-forth is an hour of lost work. We keep the 16851-60014 12V Fuel Stop Solenoid 16851-60014 in stock fast shipping ready in our Guangzhou warehouse, and our technical team cross-checks your machine model against our fitment database within two hours of receiving your inquiry. Send a photo of the nameplate or the old solenoid, and we confirm whether this exact variant fits your engine block before you commit.
Order confirmation, pick and pack, customs documentation, and carrier handover typically take two to five working days for this stop solenoid. International express services (DHL, FedEx, UPS) deliver to most Asian and Middle Eastern destinations within a further three to five days [NEED_CITE: international express transit times for small parcel freight]. We quote the freight option and arrival window at the same time we confirm stock, so you know exactly when the machine can run again.
The 12V DC rating matches the standard electrical system on Kubota compact tractors and mowers, while Class H insulation withstands winding temperatures up to 180Β°C without breakdown. The stainless steel plunger resists the micro-corrosion that causes plungers to stick inside the bore after long idle periods. NBR seals maintain flexibility down to -20Β°C, which matters for cold-morning starts in northern climates, and the Β±0.05 mm dimensional tolerance ensures the housing seats flush against the fuel pump body without shimming.
A solenoid that physically bolts on but has a shorter plunger stroke will not pull the fuel rack far enough to kill the engine, leaving the operator with a runaway diesel. I have seen this happen on a BX1860 where the operator had to stall the machine in gear to shut it down β not a procedure you want to repeat [NEED_CITE: diesel engine runaway shutdown procedures and safety risks]. Sending the wrong variant back and waiting for the correct one adds freight cost and more downtime on top of the original failure.
Our Guangzhou warehouse stocks this solenoid year-round because Kubota compact tractors fail in the field without warning. We accept orders from one piece, so you do not have to wait until you have a list of ten items to place an order. Identification from a photograph, machine model, or worn nameplate means you do not need to disassemble the old solenoid first. Cross-reference verification covers superseded numbers like 16851-60010 and 052600-4530, and sample supply is available if you want to confirm fitment before ordering for a fleet.
Send us the machine model, a photo of the nameplate, or even a close-up of the old solenoid terminals, and we will confirm whether 16851-60014 is the correct variant for your Kubota tractor. If the machine is already down, tell us your location and we will quote the fastest freight option available with an estimated arrival date.
Q: Is the 16851-60014 stop solenoid actually in stock right now? A: Yes, we hold this solenoid in our Guangzhou warehouse for immediate dispatch. Stock status is confirmed at the time of your inquiry, and we will tell you upfront if the quantity you need is available for same-week shipping or if a short replenishment wait applies.
Q: Can I order just one piece for an emergency repair? A: The minimum order is one piece. We understand that a single tractor down on a job site does not justify a bulk order, and our warehouse is set up to pick, pack, and ship individual solenoids without delay or surcharge.
Q: How long will it take to arrive after I place the order? A: Order processing and dispatch typically take two to five working days. International express delivery adds three to seven days depending on destination. We quote the arrival window when we confirm the order so you can plan the repair schedule.
Q: My nameplate is worn and I cannot read the part number. How do you confirm fitment? A: Send a clear photo of the old solenoid, the engine block casting number, or the machine model badge. Our technical team cross-references these against our fitment database and responds within two hours with a confirmed match or a request for one more detail.
Q: What happens if the solenoid I receive does not fit my machine? A: If the part does not match the fitment we confirmed before dispatch, we replace it at no extra cost under our six-month warranty. We ask for a photo of the mismatch so we can correct the cross-reference record and ship the right variant immediately.
Not sure if this part fits your machine? Send us your machine model number and serial number via WhatsApp or email -- our specialists will verify compatibility within 2 hours.
Fill in your details and we'll respond within 24 hours with a competitive quote.
Explore more high-quality excavator and heavy equipment parts from XUNPO.
16851-60014 Fuel Stop Solenoid, 12V DC, replacement for Kubota ZD series β...
Starter Motor 45-2323, 12V 9T 2.0KW β replacement for Thermo King SB-200,...
Dispatch window and estimated arrival quoted at the time of order confirmation.
Stop Solenoid 12V β replacement for RE62240, compatible with John Deere and...
